A
-
ABAQUS
Optimizing the Design of Nickel and Composite Pressure Vessels [Volume 7, Issue 1, 2024, Pages 1-12]
-
Abrasive strength
Improvement of Concrete Characterization Using Nanosilica [Volume 4, Issue 2, 2021, Pages 39-52]
-
Absorbers
Response Control of Structures Subjected to Multi-Hazards of Earthquake and Wind Using Base Isolators and Absorbers [Volume 5, Issue 2, 2022, Pages 19-44]
-
Acacia gum
Mechanical Properties of Partial Replacement of Cement by adding Neem Gum/Accaacia Gum a Naturally Available Polymeric Fillers [Volume 6, Issue 3, 2023, Pages 73-85]
-
Accelerogram
Modelling and Simulation of Reinforced Concrete Bridges with varying percentages of Shape Memory Alloy Rods [Volume 1, Issue 4, 2018, Pages 62-70]
-
Adamawa State
Design and Evaluation of Drip Irrigation System for Date Palm Plantations in MAUTECH, Yola, Adamawa State, Northeastern Nigeria [Volume 1, Issue 2, 2018, Pages 70-82]
-
Adomian decomposition method
Transient Combustion Analysis for Iron Micro-Particles in a Gaseous Oxidizing Medium Using Adomian Decomposition Method [Volume 1, Issue 2, 2018, Pages 1-15]
-
Aggregate strength
Characteristic Properties of Concrete with Recycled Burnt Bricks as Coarse Aggregates Replacement [Volume 4, Issue 1, 2021, Pages 56-72]
-
Aircraft load
Analysis of Rigid Pavement Subjected to Aircraft Load Using Finite Element Technique [Volume 6, Issue 2, 2023, Pages 54-78]
-
Airfield Runway Rigid Pavement
Dynamic and Fatigue Life Prediction Analysis of Airfield Runway Rigid Pavement Using Finite Element Method [Volume 5, Issue 3, 2022, Pages 1-23]
-
Alluvial
Estimation of Aquifer Transmissivity Using Dar Zarrouk Parameters Derived from Resistivity Soundings on the Floodplain of River Dadin Kowa, Gombe State, Northeastern Nigeria [Volume 1, Issue 4, 2018, Pages 36-52]
-
Aluminium silicate
Numerical Investigation into the Effect of Laminated Casing on the Impact Resistance of Smartphone Screens [Volume 2, Issue 4, 2019, Pages 58-77]
-
Ambient Temperature
Numerical Investigation of Car Park Fire at Special Weather Conditions [Volume 6, Issue 4, 2023, Pages 33-45]
-
Analytical methods
Analytical Simulations for Spill Point Source Localization Using Inverse Problems in Closed Form [Volume 6, Issue 1, 2023, Pages 36-43]
-
ANFIS
Determining the Drift in Reinforced Concrete Building Using ANFIS Soft Computing Modeling [Volume 1, Issue 1, 2018, Pages 1-11]
-
ANFIS
The Use of Machine Learning Models in Estimating the Compressive Strength of Recycled Brick Aggregate Concrete [Volume 4, Issue 4, 2021, Pages 1-25]
-
Ansys
Three-Dimensional Modelling of Concrete Mix Structure for Numerical Stiffness Determination [Volume 1, Issue 3, 2018, Pages 15-27]
-
Ansys
Modal Analysis of a Thin-Walled Box-Girder Bridge and Railway Track Using Finite Element Framework [Volume 4, Issue 4, 2021, Pages 64-83]
-
Ansys
Analysis of Rigid Pavement Subjected to Aircraft Load Using Finite Element Technique [Volume 6, Issue 2, 2023, Pages 54-78]
-
ANSYS, Aircraft loads
Static Analysis of Rigid Pavement Runway under the Influence of Aircraft Loading by Finite Element Technique [Volume 5, Issue 4, 2022, Pages 79-101]
-
Aquatic pollution
Analytical Simulations for Spill Point Source Localization Using Inverse Problems in Closed Form [Volume 6, Issue 1, 2023, Pages 36-43]
-
Aquifers
Estimation of Aquifer Transmissivity Using Dar Zarrouk Parameters Derived from Resistivity Soundings on the Floodplain of River Dadin Kowa, Gombe State, Northeastern Nigeria [Volume 1, Issue 4, 2018, Pages 36-52]
-
Artificial intelligence
Discharge Coefficient Estimation of Sharp-Crested Curved-Plan Spillways using Soft Computing Approaches [Volume 6, Issue 2, 2023, Pages 25-44]
-
Artificial Neural Network
The Use of Machine Learning Models in Estimating the Compressive Strength of Recycled Brick Aggregate Concrete [Volume 4, Issue 4, 2021, Pages 1-25]
-
Artificial Neural Network
An ANN to Predict Sorptivity and Water Absorption of Concrete Made with Industrial Waste and Artificial Sand [Volume 6, Issue 1, 2023, Pages 44-56]
-
Artificial Neural Networks
Detecting Human Behavioral Pattern in Rock, Paper, Scissors Game Using Artificial Intelligence [Volume 3, Issue 1, 2020, Pages 25-35]
-
Artificial Neural Networks (ANN)
An Innovative Forecasting Formula for Axial Compression Capacity of Circular Steel Tubes Filled with Concrete through Neural Networks [Volume 5, Issue 4, 2022, Pages 51-66]
-
Artificial Sand
An ANN to Predict Sorptivity and Water Absorption of Concrete Made with Industrial Waste and Artificial Sand [Volume 6, Issue 1, 2023, Pages 44-56]
-
Asphalt Roads LCA
Determination of Environmental Impacts of Bituminous Highway’s by Life Cycle Assessment [Volume 3, Issue 2, 2020, Pages 38-50]
-
Assessment
Flood Hazard Mapping of the Floodplain of the Jamuna River [Volume 5, Issue 1, 2022, Pages 89-101]
-
Augmented reality
3D Modeling and Augmented Reality for Learning [Volume 6, Issue 3, 2023, Pages 52-61]
-
Autodesk Inventor®
Numerical Investigation into the Effect of Laminated Casing on the Impact Resistance of Smartphone Screens [Volume 2, Issue 4, 2019, Pages 58-77]
-
Autonomous truck
Aerodynamic Analysis of Autonomous Battery Electric Truck Concepts for Drag Reduction [Volume 5, Issue 2, 2022, Pages 71-90]
-
Auxetic honeycomb structure
Dynamics of a Sandwich Cylindrical Shell with a Functionally Graded Auxetic Honeycomb Core [Volume 7, Issue 1, 2024, Pages 35-61]
B
-
Bakhtiary dam
Rock Slope Stability Analysis in the Left Abutment of Bakhtiary Dam, Iran [Volume 4, Issue 2, 2021, Pages 1-19]
-
Bearing Capacity
Using Pressuremeter Test Results to Estimate Bearing Capacity in the Vicinity of a Slope- Numerical Analysis- [Volume 2, Issue 2, 2019, Pages 15-24]
-
Bearing Capacity
Probabilistic Analysis of Bearing Capacity with the Pressuremeter Method [Volume 5, Issue 4, 2022, Pages 102-112]
-
Belled piers
Finite Element Based Investigation of Belled Piers in Expansive Soils [Volume 5, Issue 3, 2022, Pages 64-81]
-
Belt truss
Improving the Behavior of Non-Uniform Tall Structures in Determining the Optimum Location of Belt Truss System [Volume 3, Issue 3, 2020, Pages 34-45]
-
Benefits
A Circumstantial Review on Ride-sharing Profile in Dhaka City [Volume 3, Issue 4, 2020, Pages 58-76]
-
Bio-binder
Economic Importance of Solid Waste in the Production of Pyrolytic Oil Utilized in Polymer Modified Bio-Binder Production in Makurdi Nigeria [Volume 6, Issue 4, 2023, Pages 21-32]
-
Blast load
Controlling Blast Loading of the Structural System by Cladding Material [Volume 1, Issue 3, 2018, Pages 79-99]
-
Blast load
Blast Mitigations of Mid Rise Structures by Cladding Material [Volume 2, Issue 4, 2019, Pages 78-94]
-
Blockchain-BIM
Blockchain-Building Information Modeling (BIM): Aplication in Cost Eficiency of Retrofitting Green Chemical Industrial Buildings [Volume 6, Issue 2, 2023, Pages 1-24]
-
Bonded tendon
Systematic Review for Behavior of Post-Tensioned Concrete Members with Different Tendon Bonding Conditions [Volume 5, Issue 1, 2022, Pages 36-49]
-
Box-Girder bridge
Modal Analysis of a Thin-Walled Box-Girder Bridge and Railway Track Using Finite Element Framework [Volume 4, Issue 4, 2021, Pages 64-83]
-
Bracing system
Modelling and Comparison of Plastic Performance in Ten Types of New Steel Braces under Pushover Analysis [Volume 6, Issue 2, 2023, Pages 79-97]
-
Brain Emotional Learning (BEL)
Facial Emotion Recognition Using Convolutional Brain Emotional Learning (CBEL) Model [Volume 5, Issue 3, 2022, Pages 38-49]
-
Buckling
Elastic Buckling of Single-Stepped Columns with End and Intermediate Axial Loads [Volume 1, Issue 4, 2018, Pages 25-35]
-
Buckling loads
Buckling of Tapered Columns with Polygon Cross-Section [Volume 1, Issue 2, 2018, Pages 59-69]
-
Buildings
Human Comfort Assessment of Buildings Considering the Effect of the Masonry Infills and the Soil-Structure Interaction [Volume 2, Issue 3, 2019, Pages 38-52]
-
BVP
3D Semi-Analytical Solutions for Functionally Grade Power Law Varied Laminate Subjected to Thermo-Mechanical Loading [Volume 4, Issue 3, 2021, Pages 70-98]
C
-
Calcium inosilicate
A Computational Model for Estimating the Compressive Strength of Mortars Admixed with Mineral Materials [Volume 1, Issue 4, 2018, Pages 16-24]
-
Cam-Clay
Using Pressuremeter Test Results to Estimate Bearing Capacity in the Vicinity of a Slope- Numerical Analysis- [Volume 2, Issue 2, 2019, Pages 15-24]
-
Capable near collapse centre of stiffness
New Seismic Pushover Procedures using either Floor Enforced-Displacements or Inelastic Dynamic Eccentricities on Irregular Single-Storey R/C Buildings [Volume 2, Issue 4, 2019, Pages 1-23]
-
Carbide Waste
Stabilization of Ikpayongu laterite using Cement, RHA and Carbide Waste Mixture for Road Subbase and Base Material [Volume 3, Issue 4, 2020, Pages 77-96]
-
Carbon Fiber reinforced
Analytical Study of Fatigue Crack Growth Behavior of Steel Structure Reinforced with FRP [Volume 5, Issue 3, 2022, Pages 24-37]
-
Cassava Peel Ash
Characterisation and Use of Cassava Peel Ash in Concrete Production [Volume 3, Issue 2, 2020, Pages 12-28]
-
CFD
Numerical Analysis of Flow and Heat Transfer Characteristics between Two Parallel Plates with Constriction(s) [Volume 4, Issue 3, 2021, Pages 55-69]
-
CFD analysis
Aerodynamic Analysis of Autonomous Battery Electric Truck Concepts for Drag Reduction [Volume 5, Issue 2, 2022, Pages 71-90]
-
Chemical composition
Chemical Composition of Commonly Used Local and Foreign Steel Reinforcements and the Effects on the Strength Property of the Material Composites [Volume 2, Issue 3, 2019, Pages 27-37]
-
Circular concrete filled steel tube (CCFST)
An Innovative Forecasting Formula for Axial Compression Capacity of Circular Steel Tubes Filled with Concrete through Neural Networks [Volume 5, Issue 4, 2022, Pages 51-66]
-
Cladding material
Blast Mitigations of Mid Rise Structures by Cladding Material [Volume 2, Issue 4, 2019, Pages 78-94]
-
Classification models
Data Visualization of Traffic Violations in Maryland, U.S. [Volume 6, Issue 1, 2023, Pages 57-69]
-
Clay
Effect of Aluminum Oxide Powder and Nanoparticles on Kaolinite Mobilization in Sand [Volume 5, Issue 4, 2022, Pages 67-78]
-
Closed-form solution
Static Analysis of Rigid Airfield Pavement Using Finite Element Method Vs Closed-Form Solution [Volume 5, Issue 4, 2022, Pages 23-50]
-
Code 2800
Evaluation and Comparison of Seismic Performance in Irregular Steel Structures with Modern Concentrically Braces [Volume 6, Issue 4, 2023, Pages 59-79]
-
Coefficient
Characterization of Fluid-Structure Interaction on Hydrodynamic Performance of Different Ship Hulls Using ANSYS [Volume 7, Issue 1, 2024, Pages 13-34]
-
Cohesive
A Moving Cohesive Mesh Formulation to Predict Debonding Phenomena in Layered Structures [Volume 1, Issue 2, 2018, Pages 16-26]
-
Column retrofitting
Numerical Analysis of Retrofitted RC Column under Lateral Load [Volume 5, Issue 3, 2022, Pages 82-95]
-
Composite
Numerical Analysis of the Effect of Blast Wave on Pressure Vessels [Volume 6, Issue 3, 2023, Pages 39-51]
-
Composite
Optimizing the Design of Nickel and Composite Pressure Vessels [Volume 7, Issue 1, 2024, Pages 1-12]
-
Composites
Effective Thermal Conductivity of Composites: Numerical Study [Volume 6, Issue 2, 2023, Pages 98-107]
-
Composite structures
Prefabricated Composite Beams Based on Innovative Shear Connection [Volume 4, Issue 2, 2021, Pages 20-26]
-
Compression Stiffness
Three-Dimensional Modelling of Concrete Mix Structure for Numerical Stiffness Determination [Volume 1, Issue 3, 2018, Pages 15-27]
-
Compressive strength
Reliability-Based Investigation on Compressive Strength Characteristics of Structural-Sized Iroko (Meliceae Excelsa) and Mahogany (Khaya Ivorensis) Timber Column Found in Nigeria [Volume 1, Issue 1, 2018, Pages 23-37]
-
Compressive strength
A Computational Model for Estimating the Compressive Strength of Mortars Admixed with Mineral Materials [Volume 1, Issue 4, 2018, Pages 16-24]
-
Compressive strength
Characteristic Properties of Concrete with Recycled Burnt Bricks as Coarse Aggregates Replacement [Volume 4, Issue 1, 2021, Pages 56-72]
-
Compressive strength
Improvement of Concrete Characterization Using Nanosilica [Volume 4, Issue 2, 2021, Pages 39-52]
-
Compressive strength
Experimental Study of Concrete Using Raw Rice Husk as Partial Replacement of Cement with Natural Fiber (Jute Fiber) as Reinforcing Material [Volume 4, Issue 3, 2021, Pages 29-42]
-
Compressive strength
The Use of Machine Learning Models in Estimating the Compressive Strength of Recycled Brick Aggregate Concrete [Volume 4, Issue 4, 2021, Pages 1-25]
-
Computational Fluid Dynamics
Flow and Pollutant Dispersion Model in a 2D Urban Street Canyons Using Computational Fluid Dynamics [Volume 1, Issue 1, 2018, Pages 83-93]
-
Computational Fluid Dynamics
Wind Pressure Coefficients on Pyramidal Roof of Square Plan Low Rise Double Storey Building [Volume 2, Issue 1, 2019, Pages 1-16]
-
Computational Fluid Dynamics
Wind Induced Pressure Variation on High-Rise Geometrically Modified Building Having Interference through CFD Simulation [Volume 4, Issue 4, 2021, Pages 26-38]
-
Computational Fluid Dynamics (CFD)
Development of Dam-Break Model Considering Real Case Studies with Asymmetric Reservoirs [Volume 4, Issue 4, 2021, Pages 39-63]
-
COMSOL
Effective Thermal Conductivity of Composites: Numerical Study [Volume 6, Issue 2, 2023, Pages 98-107]
-
Concentrically braces
Evaluation and Comparison of Seismic Performance in Irregular Steel Structures with Modern Concentrically Braces [Volume 6, Issue 4, 2023, Pages 59-79]
-
Concrete
Determining the Drift in Reinforced Concrete Building Using ANFIS Soft Computing Modeling [Volume 1, Issue 1, 2018, Pages 1-11]
-
Concrete
The Use of Machine Learning Models in Estimating the Compressive Strength of Recycled Brick Aggregate Concrete [Volume 4, Issue 4, 2021, Pages 1-25]
-
Concrete
Reliability Assessment of Natural Aggregate Pulverized Glass Powder Concrete Beam Subjected to Shearing Forces [Volume 6, Issue 2, 2023, Pages 45-53]
-
Concrete bridges
Evaluation the Impact of Flexible Joints and Deck on the Seismic Response of Bridges [Volume 5, Issue 2, 2022, Pages 1-18]
-
Concrete Durability
Improvement of Concrete Characterization Using Nanosilica [Volume 4, Issue 2, 2021, Pages 39-52]
-
Concrete Flexural Strength
Characterisation and Use of Cassava Peel Ash in Concrete Production [Volume 3, Issue 2, 2020, Pages 12-28]
-
Concrete Mix
Numerical Simulation of Concrete Mix Structure and Detection of its Elastic Stiffness [Volume 1, Issue 1, 2018, Pages 12-22]
-
Concrete Mix
Three-Dimensional Modelling of Concrete Mix Structure for Numerical Stiffness Determination [Volume 1, Issue 3, 2018, Pages 15-27]
-
Constant strain
Influence of Additives on the Failure Mode of Asphalt Concrete [Volume 6, Issue 4, 2023, Pages 80-91]
-
Constant volume
Buckling of Tapered Columns with Polygon Cross-Section [Volume 1, Issue 2, 2018, Pages 59-69]
-
Contamination
The Effect of Heavy Metal Concentration on the Soil of Odagbo Area, Kogi State Nigeria [Volume 4, Issue 4, 2021, Pages 84-93]
-
Convolutional Neural Network (CNN)
Facial Emotion Recognition Using Convolutional Brain Emotional Learning (CBEL) Model [Volume 5, Issue 3, 2022, Pages 38-49]
-
Cooling of complex fluids
Numerical Investigation of the Cooling of Shear Thinning Fluids in Cylindrical Horizontal Ducts [Volume 1, Issue 4, 2018, Pages 53-61]
-
Corner-cut building
Wind Induced Pressure Variation on High-Rise Geometrically Modified Building Having Interference through CFD Simulation [Volume 4, Issue 4, 2021, Pages 26-38]
-
Cost analysis
Cost Analysis of a Large Solar Plant with Parabolic Trough Concentrators Using Molten Salt Storage Tank [Volume 4, Issue 1, 2021, Pages 37-55]
-
Cost Comparison
Finite Element Based Investigation of Belled Piers in Expansive Soils [Volume 5, Issue 3, 2022, Pages 64-81]
-
Cost performance
Blockchain-Building Information Modeling (BIM): Aplication in Cost Eficiency of Retrofitting Green Chemical Industrial Buildings [Volume 6, Issue 2, 2023, Pages 1-24]
-
Counter flow
Numerical Investigation of the Cooling of Shear Thinning Fluids in Cylindrical Horizontal Ducts [Volume 1, Issue 4, 2018, Pages 53-61]
-
Crack development
Assessment of Crack Development Age Due to Corrosion on Reinforced High Strength Self Compacting Concrete with Inclusion of Potential Ternary Blended Cementitious Materials [Volume 6, Issue 1, 2023, Pages 18-35]
-
Crack Growth
Analytical Study of Fatigue Crack Growth Behavior of Steel Structure Reinforced with FRP [Volume 5, Issue 3, 2022, Pages 24-37]
-
Cross-section derivate DEM
Flood Hazard Mapping of the Floodplain of the Jamuna River [Volume 5, Issue 1, 2022, Pages 89-101]
-
Crushed burnt brick
Characteristic Properties of Concrete with Recycled Burnt Bricks as Coarse Aggregates Replacement [Volume 4, Issue 1, 2021, Pages 56-72]
-
Crushed burnt brick concrete
Characteristic Properties of Concrete with Recycled Burnt Bricks as Coarse Aggregates Replacement [Volume 4, Issue 1, 2021, Pages 56-72]
-
Curvature of radius
Vehicle Bridge Interaction Analysis on Concrete and Steel Curved Bridges [Volume 4, Issue 4, 2021, Pages 94-108]
-
Curve axis
Discharge Coefficient Estimation of Sharp-Crested Curved-Plan Spillways using Soft Computing Approaches [Volume 6, Issue 2, 2023, Pages 25-44]
-
Curved bridge
Vehicle Bridge Interaction Analysis on Concrete and Steel Curved Bridges [Volume 4, Issue 4, 2021, Pages 94-108]
-
Cylindrical pipe
Numerical Investigation of the Cooling of Shear Thinning Fluids in Cylindrical Horizontal Ducts [Volume 1, Issue 4, 2018, Pages 53-61]
-
Cylindrical Shell
Dynamics of a Sandwich Cylindrical Shell with a Functionally Graded Auxetic Honeycomb Core [Volume 7, Issue 1, 2024, Pages 35-61]
D
-
Dadin Kowa
Estimation of Aquifer Transmissivity Using Dar Zarrouk Parameters Derived from Resistivity Soundings on the Floodplain of River Dadin Kowa, Gombe State, Northeastern Nigeria [Volume 1, Issue 4, 2018, Pages 36-52]
-
Dam-break
Development of Dam-Break Model Considering Real Case Studies with Asymmetric Reservoirs [Volume 4, Issue 4, 2021, Pages 39-63]
-
Dar Zarrouk Parameters
Estimation of Aquifer Transmissivity Using Dar Zarrouk Parameters Derived from Resistivity Soundings on the Floodplain of River Dadin Kowa, Gombe State, Northeastern Nigeria [Volume 1, Issue 4, 2018, Pages 36-52]
-
Data analysis research
Data Visualization of Traffic Violations in Maryland, U.S. [Volume 6, Issue 1, 2023, Pages 57-69]
-
Data-driven models
Determining the Drift in Reinforced Concrete Building Using ANFIS Soft Computing Modeling [Volume 1, Issue 1, 2018, Pages 1-11]
-
Data Visualization
Data Visualization of Traffic Violations in Maryland, U.S. [Volume 6, Issue 1, 2023, Pages 57-69]
-
Date Palms
Design and Evaluation of Drip Irrigation System for Date Palm Plantations in MAUTECH, Yola, Adamawa State, Northeastern Nigeria [Volume 1, Issue 2, 2018, Pages 70-82]
-
Delamination
A Moving Cohesive Mesh Formulation to Predict Debonding Phenomena in Layered Structures [Volume 1, Issue 2, 2018, Pages 16-26]
-
Design
Design, Fabrication and Structural Analysis of a 5 Tons Hydraulic Press and Mould Machine for Crucible Production [Volume 3, Issue 3, 2020, Pages 46-58]
-
Design equation
Design Formula at Ultimate Stresses for Ekki (Lophira Alata) Timber Beam [Volume 2, Issue 2, 2019, Pages 25-35]
-
Development
Study of Traffic Forecast for Intelligent Transportation System [Volume 5, Issue 3, 2022, Pages 50-63]
-
Diagrid system
Analysis of Diagrid Structural System for High Rise Steel Buildings [Volume 3, Issue 3, 2020, Pages 21-33]
-
Differential Transformation Method
On the Study of Magnetohydrodynamic Squeezing Flow of Nanofluid between Two Parallel Plates Embedded in a Porous Medium [Volume 1, Issue 4, 2018, Pages 1-15]
-
Dimensionless
Effect of Aluminum Oxide Powder and Nanoparticles on Kaolinite Mobilization in Sand [Volume 5, Issue 4, 2022, Pages 67-78]
-
Disadvantages
A Circumstantial Review on Ride-sharing Profile in Dhaka City [Volume 3, Issue 4, 2020, Pages 58-76]
-
Discharge coefficient
Discharge Coefficient Estimation of Sharp-Crested Curved-Plan Spillways using Soft Computing Approaches [Volume 6, Issue 2, 2023, Pages 25-44]
-
Displacement
Determining the Drift in Reinforced Concrete Building Using ANFIS Soft Computing Modeling [Volume 1, Issue 1, 2018, Pages 1-11]
-
Displacement
Thermal Vibration of Thick Functionally Graded Material Spherical Shells by Using Third-order Shear Deformation Theory and Simply Homogeneous Equation [Volume 6, Issue 4, 2023, Pages 46-58]
-
Distinct Element Method
Rock Slope Stability Analysis in the Left Abutment of Bakhtiary Dam, Iran [Volume 4, Issue 2, 2021, Pages 1-19]
-
Drainage structure
Assessing Flood Occurrence and Modeling Impact of Urban Drainage Structure [Volume 3, Issue 3, 2020, Pages 1-11]
-
Drip Irrigation
Design and Evaluation of Drip Irrigation System for Date Palm Plantations in MAUTECH, Yola, Adamawa State, Northeastern Nigeria [Volume 1, Issue 2, 2018, Pages 70-82]
-
Driverless truck
Aerodynamic Analysis of Autonomous Battery Electric Truck Concepts for Drag Reduction [Volume 5, Issue 2, 2022, Pages 71-90]
-
Durability
Contribution of the Blast Furnace Slag on the Behavior of HPC in a Hydrochloric Environment [Volume 4, Issue 2, 2021, Pages 27-38]
-
Dynamic analysis
Dynamic and Fatigue Life Prediction Analysis of Airfield Runway Rigid Pavement Using Finite Element Method [Volume 5, Issue 3, 2022, Pages 1-23]
E
-
Earth Dam
Evaluation of the Effect of Modulus of Elasticity in Clay Core on the Arching in the Crest of Earth Dams [Volume 3, Issue 3, 2020, Pages 12-20]
-
Earthquake Load
Response Control of Structures Subjected to Multi-Hazards of Earthquake and Wind Using Base Isolators and Absorbers [Volume 5, Issue 2, 2022, Pages 19-44]
-
Easyfit 5.6 Software
EN 338 Strength Characterization and Grading of Igba (Rhizophora Racemosa) and Adere (Syzgium Guineense) Timbers for Structural Applications [Volume 2, Issue 4, 2019, Pages 24-37]
-
Eccentric effects
Seismic Analysis of Eccentric Steel Structure on a Shaking Table [Volume 3, Issue 2, 2020, Pages 1-11]
-
Eccentric structure
Seismic Analysis of Eccentric Steel Structure on a Shaking Table [Volume 3, Issue 2, 2020, Pages 1-11]
-
Efficiency
Application of Numerical Method in Assessing the Variations in Pile Group Efficiency under Different Circumstances [Volume 5, Issue 1, 2022, Pages 50-68]
-
Efficiency coefficient
Presenting an Optimal Design Procedure for a Variety of TLCDs to Improve the Seismic Response of Offshore Platforms [Volume 6, Issue 3, 2023, Pages 1-26]
-
Emotional Expressions
Facial Emotion Recognition Using Convolutional Brain Emotional Learning (CBEL) Model [Volume 5, Issue 3, 2022, Pages 38-49]
-
Empirical Equation
Vehicle Bridge Interaction Analysis on Concrete and Steel Curved Bridges [Volume 4, Issue 4, 2021, Pages 94-108]
-
EPD
The Relation between Deposited Weight and Quality of Coating in EPD Method Derived by Genetic Programming [Volume 4, Issue 1, 2021, Pages 73-83]
-
Equation
Effect of Aluminum Oxide Powder and Nanoparticles on Kaolinite Mobilization in Sand [Volume 5, Issue 4, 2022, Pages 67-78]
-
Equation
Viscosity Model of Polymer Extract from Irvingia Gabonensis [Volume 6, Issue 3, 2023, Pages 27-38]
-
Etabs
Analysis of Diagrid Structural System for High Rise Steel Buildings [Volume 3, Issue 3, 2020, Pages 21-33]
-
Expansive Soils
Finite Element Based Investigation of Belled Piers in Expansive Soils [Volume 5, Issue 3, 2022, Pages 64-81]
-
Experiment
Viscosity Model of Polymer Extract from Irvingia Gabonensis [Volume 6, Issue 3, 2023, Pages 27-38]
-
Experimental Tests
An Innovative Forecasting Formula for Axial Compression Capacity of Circular Steel Tubes Filled with Concrete through Neural Networks [Volume 5, Issue 4, 2022, Pages 51-66]
-
Extreme precipitation
Assessing Flood Occurrence and Modeling Impact of Urban Drainage Structure [Volume 3, Issue 3, 2020, Pages 1-11]
F
-
Failure stages
Influence of Additives on the Failure Mode of Asphalt Concrete [Volume 6, Issue 4, 2023, Pages 80-91]
-
Fanpalm
Comparative Studies of the Effects of Blocking and Water Repellant Agents on Tensile Strengths of Fanpalm [Volume 2, Issue 1, 2019, Pages 17-29]
-
Far-Field Earthquake
Use of Tuned Mass Dampers in Controlling the Vibrations of Steel Structures with Vertical Irregularity of Mass [Volume 1, Issue 2, 2018, Pages 83-94]
-
Fatigue failure
Analytical Study of Fatigue Crack Growth Behavior of Steel Structure Reinforced with FRP [Volume 5, Issue 3, 2022, Pages 24-37]
-
Fatigue life prediction
Dynamic and Fatigue Life Prediction Analysis of Airfield Runway Rigid Pavement Using Finite Element Method [Volume 5, Issue 3, 2022, Pages 1-23]
-
Fault rupture
Numerical Analysis of Reverse Dip-slip Fault Rupture on Steel Buildings [Volume 3, Issue 4, 2020, Pages 40-57]
-
FEM
Dynamic and Fatigue Life Prediction Analysis of Airfield Runway Rigid Pavement Using Finite Element Method [Volume 5, Issue 3, 2022, Pages 1-23]
-
FEM
Finite Element Based Investigation of Belled Piers in Expansive Soils [Volume 5, Issue 3, 2022, Pages 64-81]
-
FEM
Analysis of Rigid Pavement Subjected to Aircraft Load Using Finite Element Technique [Volume 6, Issue 2, 2023, Pages 54-78]
-
FEM
Numerical Study of Hydraulic Percolation in Porous Media Using Two Hydraulic Structures [Volume 6, Issue 4, 2023, Pages 1-20]
-
FGM
Cylindrical Bending of Power Law Varied Functionally Graded Laminate Subjected to Thermo-Mechanical Loading [Volume 3, Issue 4, 2020, Pages 20-39]
-
FGM
3D Semi-Analytical Solutions for Functionally Grade Power Law Varied Laminate Subjected to Thermo-Mechanical Loading [Volume 4, Issue 3, 2021, Pages 70-98]
-
Fiber laminate
Analytical Study of Fatigue Crack Growth Behavior of Steel Structure Reinforced with FRP [Volume 5, Issue 3, 2022, Pages 24-37]
-
Finite Element
A Moving Cohesive Mesh Formulation to Predict Debonding Phenomena in Layered Structures [Volume 1, Issue 2, 2018, Pages 16-26]
-
Finite Element
Buckling of Tapered Columns with Polygon Cross-Section [Volume 1, Issue 2, 2018, Pages 59-69]
-
Finite Element
Evaluation of Limit Equilibrium and Finite Element Methods in Slope Stability Analysis - Case Study of Zaremroud Landslide, Iran [Volume 2, Issue 3, 2019, Pages 1-15]
-
Finite Element
Static Analysis of Rigid Airfield Pavement Using Finite Element Method Vs Closed-Form Solution [Volume 5, Issue 4, 2022, Pages 23-50]
-
Finite Element
Effective Thermal Conductivity of Composites: Numerical Study [Volume 6, Issue 2, 2023, Pages 98-107]
-
Finite element method
The Effect of Diagonal Stiffeners on the Behaviour of Stiffened Steel Plate Shear Wall [Volume 1, Issue 1, 2018, Pages 58-67]
-
Finite element method
Steel Plate Shear Wall with Different Infill Steel Plates [Volume 1, Issue 3, 2018, Pages 1-14]
-
Finite element method
Elastic Buckling of Single-Stepped Columns with End and Intermediate Axial Loads [Volume 1, Issue 4, 2018, Pages 25-35]
-
Finite element method
Modal Analysis of a Thin-Walled Box-Girder Bridge and Railway Track Using Finite Element Framework [Volume 4, Issue 4, 2021, Pages 64-83]
-
Finite element method
Static Analysis of Rigid Pavement Runway under the Influence of Aircraft Loading by Finite Element Technique [Volume 5, Issue 4, 2022, Pages 79-101]
-
Finite element model
Fragility of a Weir Structure due to Scouring [Volume 3, Issue 1, 2020, Pages 1-15]
-
Finite element modelling
Human Comfort Assessment of Buildings Considering the Effect of the Masonry Infills and the Soil-Structure Interaction [Volume 2, Issue 3, 2019, Pages 38-52]
-
Fire
Numerical Investigation of Car Park Fire at Special Weather Conditions [Volume 6, Issue 4, 2023, Pages 33-45]
-
Flexible joints
Evaluation the Impact of Flexible Joints and Deck on the Seismic Response of Bridges [Volume 5, Issue 2, 2022, Pages 1-18]
-
Flexible pavement
Influence of Additives on the Failure Mode of Asphalt Concrete [Volume 6, Issue 4, 2023, Pages 80-91]
-
Flexural capacity
Flexural Capacity Prediction for Reinforced Concrete Beams by Group Method of Data Handling Approach [Volume 1, Issue 3, 2018, Pages 100-110]
-
Flexure
Influence of Additives on the Failure Mode of Asphalt Concrete [Volume 6, Issue 4, 2023, Pages 80-91]
-
Flood hazard mapping for land use
Flood Hazard Mapping of the Floodplain of the Jamuna River [Volume 5, Issue 1, 2022, Pages 89-101]
-
Flooding
Fragility of a Weir Structure due to Scouring [Volume 3, Issue 1, 2020, Pages 1-15]
-
Floor enforced displacements
New Seismic Pushover Procedures using either Floor Enforced-Displacements or Inelastic Dynamic Eccentricities on Irregular Single-Storey R/C Buildings [Volume 2, Issue 4, 2019, Pages 1-23]
-
Flow-3D
Development of Dam-Break Model Considering Real Case Studies with Asymmetric Reservoirs [Volume 4, Issue 4, 2021, Pages 39-63]
-
Fluid Flow
Lattice Boltzmann Simulation of Fluid Flow and Heat Transfer through Partially Filled Porous Media [Volume 2, Issue 4, 2019, Pages 38-57]
-
Fluid-structure interaction
Wave Propagation through a Submerged Horizontal Plate at the Bottom of a Water Channel [Volume 3, Issue 4, 2020, Pages 1-19]
-
Fly ash, Ground granulated blast furnace
Assessment of Crack Development Age Due to Corrosion on Reinforced High Strength Self Compacting Concrete with Inclusion of Potential Ternary Blended Cementitious Materials [Volume 6, Issue 1, 2023, Pages 18-35]
-
Footing Dimensions
Numerical Assessment of Isolated Footing Capacity due to its Size and the Impact of Neighboring Foundation [Volume 5, Issue 2, 2022, Pages 45-70]
-
Footing minimum spacing
Numerical Assessment of Isolated Footing Capacity due to its Size and the Impact of Neighboring Foundation [Volume 5, Issue 2, 2022, Pages 45-70]
-
Four Point Bending
EN 338 Strength Characterization and Grading of Igba (Rhizophora Racemosa) and Adere (Syzgium Guineense) Timbers for Structural Applications [Volume 2, Issue 4, 2019, Pages 24-37]
-
Fracture behavior of concrete
Debonding and Fracture Behavior of Concrete Specimens Retrofitted by FRP Composite [Volume 1, Issue 2, 2018, Pages 27-40]
-
Fracture parameters
Debonding and Fracture Behavior of Concrete Specimens Retrofitted by FRP Composite [Volume 1, Issue 2, 2018, Pages 27-40]
-
Fragility curves
Seismic Fragility Assessment of Local and Global Failures in Low-rise Non-ductile Existing RC Buildings: Empirical Shear-Axial Modelling vs. ASCE/SEI 41 Approach [Volume 1, Issue 1, 2018, Pages 38-57]
-
Framed Tube
Improving the Behavior of Non-Uniform Tall Structures in Determining the Optimum Location of Belt Truss System [Volume 3, Issue 3, 2020, Pages 34-45]
-
Free vibration
Study on Natural Frequency of Frame Structures [Volume 2, Issue 2, 2019, Pages 36-48]
-
Free vibration
Modal Analysis of a Thin-Walled Box-Girder Bridge and Railway Track Using Finite Element Framework [Volume 4, Issue 4, 2021, Pages 64-83]
-
Free vibration
Dynamics of a Sandwich Cylindrical Shell with a Functionally Graded Auxetic Honeycomb Core [Volume 7, Issue 1, 2024, Pages 35-61]
-
Frequency
Study of the Effect of Vibration Characteristics on the Stability of RC Structures [Volume 5, Issue 2, 2022, Pages 113-129]
-
Fresh & Durability properties
Effect on the Addition of Nano Silica Particles and Peg on the Rheological, Strength and Durability Properties of High Strength Self Curing Self Compacting Concrete [Volume 5, Issue 2, 2022, Pages 91-112]
-
Friction damper
Performance-Based Design of RC Structures Subjected to Seismic Load Using a Hybrid Retrofitting Method with Friction Damper and Steel Bracing [Volume 5, Issue 1, 2022, Pages 19-35]
-
FRP
Flexural Capacity Prediction for Reinforced Concrete Beams by Group Method of Data Handling Approach [Volume 1, Issue 3, 2018, Pages 100-110]
-
FRP composites
Debonding and Fracture Behavior of Concrete Specimens Retrofitted by FRP Composite [Volume 1, Issue 2, 2018, Pages 27-40]
-
Fuel demand
Simulation of Priority Queuing at TOTAL Petrol Filling Station in Makurdi Town Using SimEvents Toolkit [Volume 2, Issue 1, 2019, Pages 56-66]
-
Functionally Graded Material
Dynamics of a Sandwich Cylindrical Shell with a Functionally Graded Auxetic Honeycomb Core [Volume 7, Issue 1, 2024, Pages 35-61]
G
-
GDQ
Thermal Vibration of Thick Functionally Graded Material Spherical Shells by Using Third-order Shear Deformation Theory and Simply Homogeneous Equation [Volume 6, Issue 4, 2023, Pages 46-58]
-
Genetic programming
The Relation between Deposited Weight and Quality of Coating in EPD Method Derived by Genetic Programming [Volume 4, Issue 1, 2021, Pages 73-83]
-
Geo-Accumulation Index
The Effect of Heavy Metal Concentration on the Soil of Odagbo Area, Kogi State Nigeria [Volume 4, Issue 4, 2021, Pages 84-93]
-
Geoelectric sequence
Estimation of Aquifer Transmissivity Using Dar Zarrouk Parameters Derived from Resistivity Soundings on the Floodplain of River Dadin Kowa, Gombe State, Northeastern Nigeria [Volume 1, Issue 4, 2018, Pages 36-52]
-
Geopolymer concrete
Development of Fly Ash-GGBS based Self Compacting Geo-Polymer Concrete with and without Steel Fibres [Volume 4, Issue 3, 2021, Pages 1-18]
-
Geospatial Information Systems
Modelling Effects of Land Use Changes on Traffic Based on Proposed Traffic Simulator [Volume 2, Issue 3, 2019, Pages 53-64]
-
GMDH
Flexural Capacity Prediction for Reinforced Concrete Beams by Group Method of Data Handling Approach [Volume 1, Issue 3, 2018, Pages 100-110]
-
Green industry
Blockchain-Building Information Modeling (BIM): Aplication in Cost Eficiency of Retrofitting Green Chemical Industrial Buildings [Volume 6, Issue 2, 2023, Pages 1-24]
-
Green retrofit
Blockchain-Building Information Modeling (BIM): Aplication in Cost Eficiency of Retrofitting Green Chemical Industrial Buildings [Volume 6, Issue 2, 2023, Pages 1-24]
-
Ground Penetration Radar
Underground 3D Topography Measured by Radar Sounding [Volume 6, Issue 3, 2023, Pages 62-72]
H
-
HEC-RAS
Flood Hazard Mapping of the Floodplain of the Jamuna River [Volume 5, Issue 1, 2022, Pages 89-101]
-
High rise building
Analysis of Diagrid Structural System for High Rise Steel Buildings [Volume 3, Issue 3, 2020, Pages 21-33]
-
High-rise building
Wind Induced Pressure Variation on High-Rise Geometrically Modified Building Having Interference through CFD Simulation [Volume 4, Issue 4, 2021, Pages 26-38]
-
Hollow steel beam
Numerical Simulation and Parametric Study on the Moment Capacity of Composite Beam [Volume 2, Issue 3, 2019, Pages 16-26]
-
Homotopy Perturbation Method
Influence of Jeffrey Nanofluid on Peristaltic Motion in an Inclined Endoscope [Volume 4, Issue 2, 2021, Pages 68-94]
-
Human behavior pattern detection
Detecting Human Behavioral Pattern in Rock, Paper, Scissors Game Using Artificial Intelligence [Volume 3, Issue 1, 2020, Pages 25-35]
-
Human Comfort Assessment
Human Comfort Assessment of Buildings Considering the Effect of the Masonry Infills and the Soil-Structure Interaction [Volume 2, Issue 3, 2019, Pages 38-52]
-
Hydrochloric
Contribution of the Blast Furnace Slag on the Behavior of HPC in a Hydrochloric Environment [Volume 4, Issue 2, 2021, Pages 27-38]
I
-
Impact factor
Vehicle Bridge Interaction Analysis on Concrete and Steel Curved Bridges [Volume 4, Issue 4, 2021, Pages 94-108]
-
Impeller
Numerical Modelling of Mixability of Highly Viscous Syrup in a U-Shaped Tank with Centrally Rotated Streamers [Volume 6, Issue 1, 2023, Pages 70-84]
-
Imperialist Competitive Algorithm
Multi-objective Optimization of Steel Frames with Added Viscous Dampers using Imperialist Competitive Algorithm [Volume 5, Issue 1, 2022, Pages 69-88]
-
Imported
Chemical Composition of Commonly Used Local and Foreign Steel Reinforcements and the Effects on the Strength Property of the Material Composites [Volume 2, Issue 3, 2019, Pages 27-37]
-
Inclined Endoscope
Influence of Jeffrey Nanofluid on Peristaltic Motion in an Inclined Endoscope [Volume 4, Issue 2, 2021, Pages 68-94]
-
Industrial waste Material
An ANN to Predict Sorptivity and Water Absorption of Concrete Made with Industrial Waste and Artificial Sand [Volume 6, Issue 1, 2023, Pages 44-56]
-
Inelastic dynamic eccentricity
New Seismic Pushover Procedures using either Floor Enforced-Displacements or Inelastic Dynamic Eccentricities on Irregular Single-Storey R/C Buildings [Volume 2, Issue 4, 2019, Pages 1-23]
-
Intelligent player
Detecting Human Behavioral Pattern in Rock, Paper, Scissors Game Using Artificial Intelligence [Volume 3, Issue 1, 2020, Pages 25-35]
-
Interaction
Investigating on Hydrodynamic Behavior of Slotted Breakwater Walls Under Sea Waves [Volume 2, Issue 1, 2019, Pages 30-37]
-
Intermediate axial loads
Elastic Buckling of Single-Stepped Columns with End and Intermediate Axial Loads [Volume 1, Issue 4, 2018, Pages 25-35]
-
Inverse Problems
Analytical Simulations for Spill Point Source Localization Using Inverse Problems in Closed Form [Volume 6, Issue 1, 2023, Pages 36-43]
-
Iroko
Reliability-Based Investigation on Compressive Strength Characteristics of Structural-Sized Iroko (Meliceae Excelsa) and Mahogany (Khaya Ivorensis) Timber Column Found in Nigeria [Volume 1, Issue 1, 2018, Pages 23-37]
-
Iron particle combustion
Transient Combustion Analysis for Iron Micro-Particles in a Gaseous Oxidizing Medium Using Adomian Decomposition Method [Volume 1, Issue 2, 2018, Pages 1-15]
-
Irregular steel structures
Evaluation and Comparison of Seismic Performance in Irregular Steel Structures with Modern Concentrically Braces [Volume 6, Issue 4, 2023, Pages 59-79]
-
Irregular Structures
Use of Tuned Mass Dampers in Controlling the Vibrations of Steel Structures with Vertical Irregularity of Mass [Volume 1, Issue 2, 2018, Pages 83-94]
-
Isolators
Response Control of Structures Subjected to Multi-Hazards of Earthquake and Wind Using Base Isolators and Absorbers [Volume 5, Issue 2, 2022, Pages 19-44]
-
ITS
Study of Traffic Forecast for Intelligent Transportation System [Volume 5, Issue 3, 2022, Pages 50-63]
J
-
Jeffrey Nanofluid
Influence of Jeffrey Nanofluid on Peristaltic Motion in an Inclined Endoscope [Volume 4, Issue 2, 2021, Pages 68-94]
-
Jointed rock mass
Rock Slope Stability Analysis in the Left Abutment of Bakhtiary Dam, Iran [Volume 4, Issue 2, 2021, Pages 1-19]
-
Joints
Investigation on the Seismic Performance of Joints with Different Shapes in Bridge Columns [Volume 5, Issue 1, 2022, Pages 1-18]
-
Joint stiffness
Numerical Analysis of Segmental Tunnel Linings employing a Hybrid Modeling Approach [Volume 4, Issue 1, 2021, Pages 1-18]
-
JPCP
Static Analysis of Rigid Pavement Runway under the Influence of Aircraft Loading by Finite Element Technique [Volume 5, Issue 4, 2022, Pages 79-101]
-
Jute Fiber
Experimental Study of Concrete Using Raw Rice Husk as Partial Replacement of Cement with Natural Fiber (Jute Fiber) as Reinforcing Material [Volume 4, Issue 3, 2021, Pages 29-42]
L
-
Laminate
Cylindrical Bending of Power Law Varied Functionally Graded Laminate Subjected to Thermo-Mechanical Loading [Volume 3, Issue 4, 2020, Pages 20-39]
-
Landslide
Evaluation of Limit Equilibrium and Finite Element Methods in Slope Stability Analysis - Case Study of Zaremroud Landslide, Iran [Volume 2, Issue 3, 2019, Pages 1-15]
-
Land Use Change
Modelling Effects of Land Use Changes on Traffic Based on Proposed Traffic Simulator [Volume 2, Issue 3, 2019, Pages 53-64]
-
Land use mapping
Flood Hazard Mapping of the Floodplain of the Jamuna River [Volume 5, Issue 1, 2022, Pages 89-101]
-
Laplace Equation
Numerical Study of Hydraulic Percolation in Porous Media Using Two Hydraulic Structures [Volume 6, Issue 4, 2023, Pages 1-20]
-
Lateral capacity
Numerical Analysis of Retrofitted RC Column under Lateral Load [Volume 5, Issue 3, 2022, Pages 82-95]
-
Laterally loaded pile
Experimental and Numerical Investigations of Laterally Loaded Pile Group in Multilayered Cohesionless soil [Volume 1, Issue 3, 2018, Pages 28-45]
-
Lateral response
Experimental and Numerical Investigations of Laterally Loaded Pile Group in Multilayered Cohesionless soil [Volume 1, Issue 3, 2018, Pages 28-45]
-
Laterite
Stabilization of Ikpayongu laterite using Cement, RHA and Carbide Waste Mixture for Road Subbase and Base Material [Volume 3, Issue 4, 2020, Pages 77-96]
-
Lattice Boltzmann Method
Lattice Boltzmann Simulation of Fluid Flow and Heat Transfer through Partially Filled Porous Media [Volume 2, Issue 4, 2019, Pages 38-57]
-
LCS
Controlling Blast Loading of the Structural System by Cladding Material [Volume 1, Issue 3, 2018, Pages 79-99]
-
Limbic System
Facial Emotion Recognition Using Convolutional Brain Emotional Learning (CBEL) Model [Volume 5, Issue 3, 2022, Pages 38-49]
-
Limit equilibrium
Evaluation of Limit Equilibrium and Finite Element Methods in Slope Stability Analysis - Case Study of Zaremroud Landslide, Iran [Volume 2, Issue 3, 2019, Pages 1-15]
-
Local
Chemical Composition of Commonly Used Local and Foreign Steel Reinforcements and the Effects on the Strength Property of the Material Composites [Volume 2, Issue 3, 2019, Pages 27-37]
-
Local and global collapse
Seismic Fragility Assessment of Local and Global Failures in Low-rise Non-ductile Existing RC Buildings: Empirical Shear-Axial Modelling vs. ASCE/SEI 41 Approach [Volume 1, Issue 1, 2018, Pages 38-57]
-
Localization
Time-Frequency Localization of Earthquake Record by Continuous Wavelet Transforms [Volume 2, Issue 2, 2019, Pages 49-61]
-
Long haul BET
Aerodynamic Analysis of Autonomous Battery Electric Truck Concepts for Drag Reduction [Volume 5, Issue 2, 2022, Pages 71-90]
-
Low Processing Time
Analytical Simulations for Spill Point Source Localization Using Inverse Problems in Closed Form [Volume 6, Issue 1, 2023, Pages 36-43]
M
-
Macro-scale model
Three-Dimensional Modelling of Concrete Mix Structure for Numerical Stiffness Determination [Volume 1, Issue 3, 2018, Pages 15-27]
-
Magnesium
Effect of Threshold Twin Volume Fraction in Crystal Plasticity Modeling [Volume 4, Issue 1, 2021, Pages 84-100]
-
Magnetic field
On the Study of Magnetohydrodynamic Squeezing Flow of Nanofluid between Two Parallel Plates Embedded in a Porous Medium [Volume 1, Issue 4, 2018, Pages 1-15]
-
Mahogany
Reliability-Based Investigation on Compressive Strength Characteristics of Structural-Sized Iroko (Meliceae Excelsa) and Mahogany (Khaya Ivorensis) Timber Column Found in Nigeria [Volume 1, Issue 1, 2018, Pages 23-37]
-
Maritime
Characterization of Fluid-Structure Interaction on Hydrodynamic Performance of Different Ship Hulls Using ANSYS [Volume 7, Issue 1, 2024, Pages 13-34]
-
Masonry Infills
Human Comfort Assessment of Buildings Considering the Effect of the Masonry Infills and the Soil-Structure Interaction [Volume 2, Issue 3, 2019, Pages 38-52]
-
Mass
Study on Natural Frequency of Frame Structures [Volume 2, Issue 2, 2019, Pages 36-48]
-
Mass Fraction
Effect of Aluminum Oxide Powder and Nanoparticles on Kaolinite Mobilization in Sand [Volume 5, Issue 4, 2022, Pages 67-78]
-
MATLAB
Modelling of the Compressive Strength of Palm-Nut-Fibre Concrete Using Scheffe’s Theory [Volume 3, Issue 1, 2020, Pages 36-52]
-
Matsurube Bridge
Modelling and Simulation of Reinforced Concrete Bridges with varying percentages of Shape Memory Alloy Rods [Volume 1, Issue 4, 2018, Pages 62-70]
-
Measures
A Circumstantial Review on Ride-sharing Profile in Dhaka City [Volume 3, Issue 4, 2020, Pages 58-76]
-
Mechanical properties
Numerical Simulation of Concrete Mix Structure and Detection of its Elastic Stiffness [Volume 1, Issue 1, 2018, Pages 12-22]
-
Mechanical properties
The Effect of Zeolite on Different Mechanical Properties and Permeability of Self-Compacting Concrete [Volume 3, Issue 1, 2020, Pages 53-68]
-
Mechanical properties
Development of Fly Ash-GGBS based Self Compacting Geo-Polymer Concrete with and without Steel Fibres [Volume 4, Issue 3, 2021, Pages 1-18]
-
Mechanical properties
Mechanical Properties of Partial Replacement of Cement by adding Neem Gum/Accaacia Gum a Naturally Available Polymeric Fillers [Volume 6, Issue 3, 2023, Pages 73-85]
-
Meta-analysis
Systematic Review for Behavior of Post-Tensioned Concrete Members with Different Tendon Bonding Conditions [Volume 5, Issue 1, 2022, Pages 36-49]
-
Microstructure
Contribution of the Blast Furnace Slag on the Behavior of HPC in a Hydrochloric Environment [Volume 4, Issue 2, 2021, Pages 27-38]
-
MIDAS GTS, EPM
Comparative Three-Dimensional Finite Element Analysis of Piled Raft Foundations [Volume 4, Issue 1, 2021, Pages 19-36]
-
Mineral material
A Computational Model for Estimating the Compressive Strength of Mortars Admixed with Mineral Materials [Volume 1, Issue 4, 2018, Pages 16-24]
-
Modeling impact
Assessing Flood Occurrence and Modeling Impact of Urban Drainage Structure [Volume 3, Issue 3, 2020, Pages 1-11]
-
Mohr-Coulomb
Using Pressuremeter Test Results to Estimate Bearing Capacity in the Vicinity of a Slope- Numerical Analysis- [Volume 2, Issue 2, 2019, Pages 15-24]
-
Molten Salt
Cost Analysis of a Large Solar Plant with Parabolic Trough Concentrators Using Molten Salt Storage Tank [Volume 4, Issue 1, 2021, Pages 37-55]
-
Moment strength
Numerical Simulation and Parametric Study on the Moment Capacity of Composite Beam [Volume 2, Issue 3, 2019, Pages 16-26]
-
Mortar
A Computational Model for Estimating the Compressive Strength of Mortars Admixed with Mineral Materials [Volume 1, Issue 4, 2018, Pages 16-24]
-
Moving mesh
A Moving Cohesive Mesh Formulation to Predict Debonding Phenomena in Layered Structures [Volume 1, Issue 2, 2018, Pages 16-26]
-
Multi-layer Perceptron (MLP)
Detecting Human Behavioral Pattern in Rock, Paper, Scissors Game Using Artificial Intelligence [Volume 3, Issue 1, 2020, Pages 25-35]
-
Multi-Objective Optimization
Multi-objective Optimization of Steel Frames with Added Viscous Dampers using Imperialist Competitive Algorithm [Volume 5, Issue 1, 2022, Pages 69-88]
N
-
Nailing Method
Numerical Analysis of Slope Stability with Nailing Method Using Bamboo as Nailing Material [Volume 6, Issue 1, 2023, Pages 1-17]
-
Nanofluid
On the Study of Magnetohydrodynamic Squeezing Flow of Nanofluid between Two Parallel Plates Embedded in a Porous Medium [Volume 1, Issue 4, 2018, Pages 1-15]
-
Nano Silica (NS)
Assessment of Crack Development Age Due to Corrosion on Reinforced High Strength Self Compacting Concrete with Inclusion of Potential Ternary Blended Cementitious Materials [Volume 6, Issue 1, 2023, Pages 18-35]
-
Natural convection
Lattice Boltzmann Simulation of Fluid Flow and Heat Transfer through Partially Filled Porous Media [Volume 2, Issue 4, 2019, Pages 38-57]
-
Natural frequency
Study on Natural Frequency of Frame Structures [Volume 2, Issue 2, 2019, Pages 36-48]
-
Near-Field Earthquake
Use of Tuned Mass Dampers in Controlling the Vibrations of Steel Structures with Vertical Irregularity of Mass [Volume 1, Issue 2, 2018, Pages 83-94]
-
Neem gum
Mechanical Properties of Partial Replacement of Cement by adding Neem Gum/Accaacia Gum a Naturally Available Polymeric Fillers [Volume 6, Issue 3, 2023, Pages 73-85]
-
Non dimensional parameters κ and τ
Controlling Blast Loading of the Structural System by Cladding Material [Volume 1, Issue 3, 2018, Pages 79-99]
-
Non-ductile reinforced concrete buildings
Seismic Fragility Assessment of Local and Global Failures in Low-rise Non-ductile Existing RC Buildings: Empirical Shear-Axial Modelling vs. ASCE/SEI 41 Approach [Volume 1, Issue 1, 2018, Pages 38-57]
-
Nonlinear behavior
Steel Plate Shear Wall with Different Infill Steel Plates [Volume 1, Issue 3, 2018, Pages 1-14]
-
Non-linear static analysis
New Seismic Pushover Procedures using either Floor Enforced-Displacements or Inelastic Dynamic Eccentricities on Irregular Single-Storey R/C Buildings [Volume 2, Issue 4, 2019, Pages 1-23]
-
Nonlinear time history analysis
Evaluation and Comparison of Seismic Performance in Irregular Steel Structures with Modern Concentrically Braces [Volume 6, Issue 4, 2023, Pages 59-79]
-
Normal law
Using Pressuremeter Test Results to Estimate Bearing Capacity in the Vicinity of a Slope- Numerical Analysis- [Volume 2, Issue 2, 2019, Pages 15-24]
-
Normal law
Probabilistic Analysis of Bearing Capacity with the Pressuremeter Method [Volume 5, Issue 4, 2022, Pages 102-112]
-
Numerical
Numerical Analysis of Flow and Heat Transfer Characteristics between Two Parallel Plates with Constriction(s) [Volume 4, Issue 3, 2021, Pages 55-69]
-
Numerical analysis
Prefabricated Composite Beams Based on Innovative Shear Connection [Volume 4, Issue 2, 2021, Pages 20-26]
-
Numerical analysis
Numerical Analysis of Retrofitted RC Column under Lateral Load [Volume 5, Issue 3, 2022, Pages 82-95]
-
Numerical analysis
Numerical Analysis of Slope Stability with Nailing Method Using Bamboo as Nailing Material [Volume 6, Issue 1, 2023, Pages 1-17]
-
Numerical analysis
Numerical Analysis of the Effect of Blast Wave on Pressure Vessels [Volume 6, Issue 3, 2023, Pages 39-51]
-
Numerical method
Evaluation of Limit Equilibrium and Finite Element Methods in Slope Stability Analysis - Case Study of Zaremroud Landslide, Iran [Volume 2, Issue 3, 2019, Pages 1-15]
-
Numerical modeling
The Effects of Outrigger Type and Distribution on Seismic Behavior of Super-Tall Building [Volume 1, Issue 3, 2018, Pages 67-78]
-
Numerical modeling
Numerical Analysis of Reverse Dip-slip Fault Rupture on Steel Buildings [Volume 3, Issue 4, 2020, Pages 40-57]
-
Numerical modeling
Effective Thermal Conductivity of Composites: Numerical Study [Volume 6, Issue 2, 2023, Pages 98-107]
-
Numerical modelling
Settlement Modelling of Raft Footing Founded on Oferekpe/Abakaliki Shale in South East Region of Nigeria [Volume 1, Issue 1, 2018, Pages 68-82]
O
-
Optimum Design
Presenting an Optimal Design Procedure for a Variety of TLCDs to Improve the Seismic Response of Offshore Platforms [Volume 6, Issue 3, 2023, Pages 1-26]
-
Outrigger
Improving the Behavior of Non-Uniform Tall Structures in Determining the Optimum Location of Belt Truss System [Volume 3, Issue 3, 2020, Pages 34-45]
-
Outrigger system
The Effects of Outrigger Type and Distribution on Seismic Behavior of Super-Tall Building [Volume 1, Issue 3, 2018, Pages 67-78]
P
-
Pallet racks
Efficient Configuration of Storage Rack System as Per Nonlinear Static Pushover Analysis under Triangular and Uniform Pattern of Lateral Loading Pattern [Volume 1, Issue 2, 2018, Pages 41-58]
-
Palm-nut-fiber
Modelling of the Compressive Strength of Palm-Nut-Fibre Concrete Using Scheffe’s Theory [Volume 3, Issue 1, 2020, Pages 36-52]
-
Parabolic trough concentrators
Cost Analysis of a Large Solar Plant with Parabolic Trough Concentrators Using Molten Salt Storage Tank [Volume 4, Issue 1, 2021, Pages 37-55]
-
Parallel plates
On the Study of Magnetohydrodynamic Squeezing Flow of Nanofluid between Two Parallel Plates Embedded in a Porous Medium [Volume 1, Issue 4, 2018, Pages 1-15]
-
Parametric investigation
Finite Element Based Investigation of Belled Piers in Expansive Soils [Volume 5, Issue 3, 2022, Pages 64-81]
-
Partial replacement in concrete production
Mechanical Properties of Partial Replacement of Cement by adding Neem Gum/Accaacia Gum a Naturally Available Polymeric Fillers [Volume 6, Issue 3, 2023, Pages 73-85]
-
Pasternak model
Analysis of Rigid Pavement Subjected to Aircraft Load Using Finite Element Technique [Volume 6, Issue 2, 2023, Pages 54-78]
-
Performance limit
Performance-Based Design of RC Structures Subjected to Seismic Load Using a Hybrid Retrofitting Method with Friction Damper and Steel Bracing [Volume 5, Issue 1, 2022, Pages 19-35]
-
Peristaltic motion
Influence of Jeffrey Nanofluid on Peristaltic Motion in an Inclined Endoscope [Volume 4, Issue 2, 2021, Pages 68-94]
-
Permeabili
The Effect of Zeolite on Different Mechanical Properties and Permeability of Self-Compacting Concrete [Volume 3, Issue 1, 2020, Pages 53-68]
-
Physical Durability
Development of Fly Ash-GGBS based Self Compacting Geo-Polymer Concrete with and without Steel Fibres [Volume 4, Issue 3, 2021, Pages 1-18]
-
Pile Diameter
Application of Numerical Method in Assessing the Variations in Pile Group Efficiency under Different Circumstances [Volume 5, Issue 1, 2022, Pages 50-68]
-
Pile group
Application of Numerical Method in Assessing the Variations in Pile Group Efficiency under Different Circumstances [Volume 5, Issue 1, 2022, Pages 50-68]
-
Pile Spacing
Application of Numerical Method in Assessing the Variations in Pile Group Efficiency under Different Circumstances [Volume 5, Issue 1, 2022, Pages 50-68]
-
Plantation
Design and Evaluation of Drip Irrigation System for Date Palm Plantations in MAUTECH, Yola, Adamawa State, Northeastern Nigeria [Volume 1, Issue 2, 2018, Pages 70-82]
-
Plastic hinge
Optimization of Reduced Beam Sections (RBS) for Ductile Detailing of Seismic Joint Connections Using Finite Element Analysis (FEA) [Volume 4, Issue 3, 2021, Pages 43-54]
-
Plastic hinge
Modelling and Comparison of Plastic Performance in Ten Types of New Steel Braces under Pushover Analysis [Volume 6, Issue 2, 2023, Pages 79-97]
-
Plastic Waste
Economic Importance of Solid Waste in the Production of Pyrolytic Oil Utilized in Polymer Modified Bio-Binder Production in Makurdi Nigeria [Volume 6, Issue 4, 2023, Pages 21-32]
-
Plaxis 3D
Settlement Modelling of Raft Footing Founded on Oferekpe/Abakaliki Shale in South East Region of Nigeria [Volume 1, Issue 1, 2018, Pages 68-82]
-
Plaxis 3D
Application of Numerical Method in Assessing the Variations in Pile Group Efficiency under Different Circumstances [Volume 5, Issue 1, 2022, Pages 50-68]
-
Plaxis 3D
Numerical Assessment of Isolated Footing Capacity due to its Size and the Impact of Neighboring Foundation [Volume 5, Issue 2, 2022, Pages 45-70]
-
Pollutant dispersion model
Flow and Pollutant Dispersion Model in a 2D Urban Street Canyons Using Computational Fluid Dynamics [Volume 1, Issue 1, 2018, Pages 83-93]
-
Pollution Index
The Effect of Heavy Metal Concentration on the Soil of Odagbo Area, Kogi State Nigeria [Volume 4, Issue 4, 2021, Pages 84-93]
-
Polyethelene glycol
Effect on the Addition of Nano Silica Particles and Peg on the Rheological, Strength and Durability Properties of High Strength Self Curing Self Compacting Concrete [Volume 5, Issue 2, 2022, Pages 91-112]
-
Porous media
Lattice Boltzmann Simulation of Fluid Flow and Heat Transfer through Partially Filled Porous Media [Volume 2, Issue 4, 2019, Pages 38-57]
-
Power Law
3D Semi-Analytical Solutions for Functionally Grade Power Law Varied Laminate Subjected to Thermo-Mechanical Loading [Volume 4, Issue 3, 2021, Pages 70-98]
-
Pozzolan
The Effect of Zeolite on Different Mechanical Properties and Permeability of Self-Compacting Concrete [Volume 3, Issue 1, 2020, Pages 53-68]
-
Pozzolan
Characterisation and Use of Cassava Peel Ash in Concrete Production [Volume 3, Issue 2, 2020, Pages 12-28]
-
Pressure Coefficients
Wind Pressure Coefficients on Pyramidal Roof of Square Plan Low Rise Double Storey Building [Volume 2, Issue 1, 2019, Pages 1-16]
-
Pressure Impulse Curve
Blast Mitigations of Mid Rise Structures by Cladding Material [Volume 2, Issue 4, 2019, Pages 78-94]
-
Pressure impulse diagram
Controlling Blast Loading of the Structural System by Cladding Material [Volume 1, Issue 3, 2018, Pages 79-99]
-
Pressuremeter test
Using Pressuremeter Test Results to Estimate Bearing Capacity in the Vicinity of a Slope- Numerical Analysis- [Volume 2, Issue 2, 2019, Pages 15-24]
-
Pressuremeter test
Probabilistic Analysis of Bearing Capacity with the Pressuremeter Method [Volume 5, Issue 4, 2022, Pages 102-112]
-
Pressure vessel
Numerical Analysis of the Effect of Blast Wave on Pressure Vessels [Volume 6, Issue 3, 2023, Pages 39-51]
-
Pressure vessel
Optimizing the Design of Nickel and Composite Pressure Vessels [Volume 7, Issue 1, 2024, Pages 1-12]
-
ProMark3 GPS
Design and Evaluation of Drip Irrigation System for Date Palm Plantations in MAUTECH, Yola, Adamawa State, Northeastern Nigeria [Volume 1, Issue 2, 2018, Pages 70-82]
-
Pulverized glass
Reliability Assessment of Natural Aggregate Pulverized Glass Powder Concrete Beam Subjected to Shearing Forces [Volume 6, Issue 2, 2023, Pages 45-53]
-
Pushover analysis
Steel Plate Shear Wall with Different Infill Steel Plates [Volume 1, Issue 3, 2018, Pages 1-14]
-
Pushover analysis
New Seismic Pushover Procedures using either Floor Enforced-Displacements or Inelastic Dynamic Eccentricities on Irregular Single-Storey R/C Buildings [Volume 2, Issue 4, 2019, Pages 1-23]
-
Pushover analysis
Performance-Based Design of RC Structures Subjected to Seismic Load Using a Hybrid Retrofitting Method with Friction Damper and Steel Bracing [Volume 5, Issue 1, 2022, Pages 19-35]
-
Pushover analysis
Modelling and Comparison of Plastic Performance in Ten Types of New Steel Braces under Pushover Analysis [Volume 6, Issue 2, 2023, Pages 79-97]
-
Pyramidal Building Model
Wind Pressure Coefficients on Pyramidal Roof of Square Plan Low Rise Double Storey Building [Volume 2, Issue 1, 2019, Pages 1-16]
-
Pyrolysis
Economic Importance of Solid Waste in the Production of Pyrolytic Oil Utilized in Polymer Modified Bio-Binder Production in Makurdi Nigeria [Volume 6, Issue 4, 2023, Pages 21-32]
-
Pyrolytic Oil
Economic Importance of Solid Waste in the Production of Pyrolytic Oil Utilized in Polymer Modified Bio-Binder Production in Makurdi Nigeria [Volume 6, Issue 4, 2023, Pages 21-32]
-
Python
Data Visualization of Traffic Violations in Maryland, U.S. [Volume 6, Issue 1, 2023, Pages 57-69]
-
Python
Numerical Analysis of the Effect of Blast Wave on Pressure Vessels [Volume 6, Issue 3, 2023, Pages 39-51]
R
-
Raft foundation
Settlement Modelling of Raft Footing Founded on Oferekpe/Abakaliki Shale in South East Region of Nigeria [Volume 1, Issue 1, 2018, Pages 68-82]
-
Railway track
Modal Analysis of a Thin-Walled Box-Girder Bridge and Railway Track Using Finite Element Framework [Volume 4, Issue 4, 2021, Pages 64-83]
-
RC jacketing
Numerical Analysis of Retrofitted RC Column under Lateral Load [Volume 5, Issue 3, 2022, Pages 82-95]
-
RC structure
Study of the Effect of Vibration Characteristics on the Stability of RC Structures [Volume 5, Issue 2, 2022, Pages 113-129]
-
Rectangular Plates
Wave Propagation through a Submerged Horizontal Plate at the Bottom of a Water Channel [Volume 3, Issue 4, 2020, Pages 1-19]
-
Regression
The Use of Machine Learning Models in Estimating the Compressive Strength of Recycled Brick Aggregate Concrete [Volume 4, Issue 4, 2021, Pages 1-25]
-
Relative humidity
Numerical Investigation of Car Park Fire at Special Weather Conditions [Volume 6, Issue 4, 2023, Pages 33-45]
-
Reliability
Reliability-Based Investigation on Compressive Strength Characteristics of Structural-Sized Iroko (Meliceae Excelsa) and Mahogany (Khaya Ivorensis) Timber Column Found in Nigeria [Volume 1, Issue 1, 2018, Pages 23-37]
-
Reliability
Probabilistic Analysis of Bearing Capacity with the Pressuremeter Method [Volume 5, Issue 4, 2022, Pages 102-112]
-
Reliability
Reliability Assessment of Natural Aggregate Pulverized Glass Powder Concrete Beam Subjected to Shearing Forces [Volume 6, Issue 2, 2023, Pages 45-53]
-
Repair and retrofitting
Analytical Study of Fatigue Crack Growth Behavior of Steel Structure Reinforced with FRP [Volume 5, Issue 3, 2022, Pages 24-37]
-
Reservoir Geometry
Development of Dam-Break Model Considering Real Case Studies with Asymmetric Reservoirs [Volume 4, Issue 4, 2021, Pages 39-63]
-
Resistivity soundings
Estimation of Aquifer Transmissivity Using Dar Zarrouk Parameters Derived from Resistivity Soundings on the Floodplain of River Dadin Kowa, Gombe State, Northeastern Nigeria [Volume 1, Issue 4, 2018, Pages 36-52]
-
Response History Analysis
New Seismic Pushover Procedures using either Floor Enforced-Displacements or Inelastic Dynamic Eccentricities on Irregular Single-Storey R/C Buildings [Volume 2, Issue 4, 2019, Pages 1-23]
-
Restriction
Numerical Analysis of Flow and Heat Transfer Characteristics between Two Parallel Plates with Constriction(s) [Volume 4, Issue 3, 2021, Pages 55-69]
-
REV scale
Lattice Boltzmann Simulation of Fluid Flow and Heat Transfer through Partially Filled Porous Media [Volume 2, Issue 4, 2019, Pages 38-57]
-
Reynolds-averaged Navier-Stokes equations
Flow and Pollutant Dispersion Model in a 2D Urban Street Canyons Using Computational Fluid Dynamics [Volume 1, Issue 1, 2018, Pages 83-93]
-
Reynolds Number
Numerical Analysis of Flow and Heat Transfer Characteristics between Two Parallel Plates with Constriction(s) [Volume 4, Issue 3, 2021, Pages 55-69]
-
Rhizophora racemosa
EN 338 Strength Characterization and Grading of Igba (Rhizophora Racemosa) and Adere (Syzgium Guineense) Timbers for Structural Applications [Volume 2, Issue 4, 2019, Pages 24-37]
-
Ribbons
Numerical Modelling of Mixability of Highly Viscous Syrup in a U-Shaped Tank with Centrally Rotated Streamers [Volume 6, Issue 1, 2023, Pages 70-84]
-
Rice husk
Experimental Study of Concrete Using Raw Rice Husk as Partial Replacement of Cement with Natural Fiber (Jute Fiber) as Reinforcing Material [Volume 4, Issue 3, 2021, Pages 29-42]
-
Rice Husk Ash
Stabilization of Ikpayongu laterite using Cement, RHA and Carbide Waste Mixture for Road Subbase and Base Material [Volume 3, Issue 4, 2020, Pages 77-96]
-
Ride fare policy
A Circumstantial Review on Ride-sharing Profile in Dhaka City [Volume 3, Issue 4, 2020, Pages 58-76]
-
Ride-hailing
A Circumstantial Review on Ride-sharing Profile in Dhaka City [Volume 3, Issue 4, 2020, Pages 58-76]
-
Rigid Airfield Pavement
Static Analysis of Rigid Airfield Pavement Using Finite Element Method Vs Closed-Form Solution [Volume 5, Issue 4, 2022, Pages 23-50]
-
Rigid pavement
Analysis of Rigid Pavement Subjected to Aircraft Load Using Finite Element Technique [Volume 6, Issue 2, 2023, Pages 54-78]
-
Rigid pavement runway
Static Analysis of Rigid Pavement Runway under the Influence of Aircraft Loading by Finite Element Technique [Volume 5, Issue 4, 2022, Pages 79-101]
-
River
Estimation of Aquifer Transmissivity Using Dar Zarrouk Parameters Derived from Resistivity Soundings on the Floodplain of River Dadin Kowa, Gombe State, Northeastern Nigeria [Volume 1, Issue 4, 2018, Pages 36-52]
-
RIVERFLOW 2D
Flood Hazard Mapping of the Floodplain of the Jamuna River [Volume 5, Issue 1, 2022, Pages 89-101]
-
Roads environmental effects
Determination of Environmental Impacts of Bituminous Highway’s by Life Cycle Assessment [Volume 3, Issue 2, 2020, Pages 38-50]
-
Rock paper scissors game
Detecting Human Behavioral Pattern in Rock, Paper, Scissors Game Using Artificial Intelligence [Volume 3, Issue 1, 2020, Pages 25-35]
-
Rock slope stability analysis
Rock Slope Stability Analysis in the Left Abutment of Bakhtiary Dam, Iran [Volume 4, Issue 2, 2021, Pages 1-19]
-
Roof center of mass displacement
Evaluation of Seismic Behavior of Steel Shear Wall by Time History Analysis [Volume 2, Issue 1, 2019, Pages 38-55]
-
Roof Slope
Wind Pressure Coefficients on Pyramidal Roof of Square Plan Low Rise Double Storey Building [Volume 2, Issue 1, 2019, Pages 1-16]
S
-
Salinity
Effect of Aluminum Oxide Powder and Nanoparticles on Kaolinite Mobilization in Sand [Volume 5, Issue 4, 2022, Pages 67-78]
-
Sandwich shell
Dynamics of a Sandwich Cylindrical Shell with a Functionally Graded Auxetic Honeycomb Core [Volume 7, Issue 1, 2024, Pages 35-61]
-
Sandy Soil
Numerical Analysis of Reverse Dip-slip Fault Rupture on Steel Buildings [Volume 3, Issue 4, 2020, Pages 40-57]
-
Sandy Soil
Application of Numerical Method in Assessing the Variations in Pile Group Efficiency under Different Circumstances [Volume 5, Issue 1, 2022, Pages 50-68]
-
Scheffe Model
Modelling of the Compressive Strength of Palm-Nut-Fibre Concrete Using Scheffe’s Theory [Volume 3, Issue 1, 2020, Pages 36-52]
-
Schlumberger
Estimation of Aquifer Transmissivity Using Dar Zarrouk Parameters Derived from Resistivity Soundings on the Floodplain of River Dadin Kowa, Gombe State, Northeastern Nigeria [Volume 1, Issue 4, 2018, Pages 36-52]
-
Seepage analysis
Fragility of a Weir Structure due to Scouring [Volume 3, Issue 1, 2020, Pages 1-15]
-
Segmental lining
Numerical Analysis of Segmental Tunnel Linings employing a Hybrid Modeling Approach [Volume 4, Issue 1, 2021, Pages 1-18]
-
Seismic control
Presenting an Optimal Design Procedure for a Variety of TLCDs to Improve the Seismic Response of Offshore Platforms [Volume 6, Issue 3, 2023, Pages 1-26]
-
Seismic Performance
Investigation on the Seismic Performance of Joints with Different Shapes in Bridge Columns [Volume 5, Issue 1, 2022, Pages 1-18]
-
Seismic Performance
Evaluation and Comparison of Seismic Performance in Irregular Steel Structures with Modern Concentrically Braces [Volume 6, Issue 4, 2023, Pages 59-79]
-
Seismic response
Evaluation the Impact of Flexible Joints and Deck on the Seismic Response of Bridges [Volume 5, Issue 2, 2022, Pages 1-18]
-
Self Compacting Concrete
Effect on the Addition of Nano Silica Particles and Peg on the Rheological, Strength and Durability Properties of High Strength Self Curing Self Compacting Concrete [Volume 5, Issue 2, 2022, Pages 91-112]
-
Self-Compacting Concrete
Development of Fly Ash-GGBS based Self Compacting Geo-Polymer Concrete with and without Steel Fibres [Volume 4, Issue 3, 2021, Pages 1-18]
-
Semi-Active Control
Multi-objective Optimization of Steel Frames with Added Viscous Dampers using Imperialist Competitive Algorithm [Volume 5, Issue 1, 2022, Pages 69-88]
-
Semi-analytical
Cylindrical Bending of Power Law Varied Functionally Graded Laminate Subjected to Thermo-Mechanical Loading [Volume 3, Issue 4, 2020, Pages 20-39]
-
Semi-circular baffles
Numerical Investigation of the Cooling of Shear Thinning Fluids in Cylindrical Horizontal Ducts [Volume 1, Issue 4, 2018, Pages 53-61]
-
SEM-PLS
Blockchain-Building Information Modeling (BIM): Aplication in Cost Eficiency of Retrofitting Green Chemical Industrial Buildings [Volume 6, Issue 2, 2023, Pages 1-24]
-
Sensor
Approaches in the development of motion sensors in the dynamics of granular media [Volume 2, Issue 2, 2019, Pages 1-14]
-
Settlement
Numerical Assessment of Isolated Footing Capacity due to its Size and the Impact of Neighboring Foundation [Volume 5, Issue 2, 2022, Pages 45-70]
-
Settlement prediction
Settlement Modelling of Raft Footing Founded on Oferekpe/Abakaliki Shale in South East Region of Nigeria [Volume 1, Issue 1, 2018, Pages 68-82]
-
Shallow footing
Numerical Assessment of Isolated Footing Capacity due to its Size and the Impact of Neighboring Foundation [Volume 5, Issue 2, 2022, Pages 45-70]
-
Shape memory alloy
Modelling and Simulation of Reinforced Concrete Bridges with varying percentages of Shape Memory Alloy Rods [Volume 1, Issue 4, 2018, Pages 62-70]
-
Sharp-crested weirs
Discharge Coefficient Estimation of Sharp-Crested Curved-Plan Spillways using Soft Computing Approaches [Volume 6, Issue 2, 2023, Pages 25-44]
-
Shear
Reliability Assessment of Natural Aggregate Pulverized Glass Powder Concrete Beam Subjected to Shearing Forces [Volume 6, Issue 2, 2023, Pages 45-53]
-
Shear and axial failures
Seismic Fragility Assessment of Local and Global Failures in Low-rise Non-ductile Existing RC Buildings: Empirical Shear-Axial Modelling vs. ASCE/SEI 41 Approach [Volume 1, Issue 1, 2018, Pages 38-57]
-
Shear core
Improving the Behavior of Non-Uniform Tall Structures in Determining the Optimum Location of Belt Truss System [Volume 3, Issue 3, 2020, Pages 34-45]
-
Shrinkage Crack
Experimental Study of Concrete Using Raw Rice Husk as Partial Replacement of Cement with Natural Fiber (Jute Fiber) as Reinforcing Material [Volume 4, Issue 3, 2021, Pages 29-42]
-
Simevent
Simulation of Priority Queuing at TOTAL Petrol Filling Station in Makurdi Town Using SimEvents Toolkit [Volume 2, Issue 1, 2019, Pages 56-66]
-
Simplex method
Modelling of the Compressive Strength of Palm-Nut-Fibre Concrete Using Scheffe’s Theory [Volume 3, Issue 1, 2020, Pages 36-52]
-
Simulation
Numerical Modelling of Mixability of Highly Viscous Syrup in a U-Shaped Tank with Centrally Rotated Streamers [Volume 6, Issue 1, 2023, Pages 70-84]
-
Slag
Contribution of the Blast Furnace Slag on the Behavior of HPC in a Hydrochloric Environment [Volume 4, Issue 2, 2021, Pages 27-38]
-
Slope
Using Pressuremeter Test Results to Estimate Bearing Capacity in the Vicinity of a Slope- Numerical Analysis- [Volume 2, Issue 2, 2019, Pages 15-24]
-
Slotted breakwaters
Investigating on Hydrodynamic Behavior of Slotted Breakwater Walls Under Sea Waves [Volume 2, Issue 1, 2019, Pages 30-37]
-
Smartphones
Numerical Investigation into the Effect of Laminated Casing on the Impact Resistance of Smartphone Screens [Volume 2, Issue 4, 2019, Pages 58-77]
-
Smoothed particle hydrodynamic
Modeling of the New Boundary of Reaction Force Based on Particle Collision in the Smoothed Particle Hydrodynamics [Volume 1, Issue 3, 2018, Pages 46-66]
-
Soft Computing
Adaptive Neuro-Fuzzy Inference System (ANFIS) Integrated with Genetic Algorithm to Optimize Piezoelectric Cantilever-Oscillator-Spring Energy Harvester: Verification with Closed-Form Solution [Volume 5, Issue 4, 2022, Pages 1-22]
-
Soil
Stabilization of Ikpayongu laterite using Cement, RHA and Carbide Waste Mixture for Road Subbase and Base Material [Volume 3, Issue 4, 2020, Pages 77-96]
-
Soil Heavy metal
The Effect of Heavy Metal Concentration on the Soil of Odagbo Area, Kogi State Nigeria [Volume 4, Issue 4, 2021, Pages 84-93]
-
Soil hydraulics
Numerical Study of Hydraulic Percolation in Porous Media Using Two Hydraulic Structures [Volume 6, Issue 4, 2023, Pages 1-20]
-
Soil-structure interaction
Human Comfort Assessment of Buildings Considering the Effect of the Masonry Infills and the Soil-Structure Interaction [Volume 2, Issue 3, 2019, Pages 38-52]
-
Solid waste
Economic Importance of Solid Waste in the Production of Pyrolytic Oil Utilized in Polymer Modified Bio-Binder Production in Makurdi Nigeria [Volume 6, Issue 4, 2023, Pages 21-32]
-
Solidworks®
Numerical Investigation into the Effect of Laminated Casing on the Impact Resistance of Smartphone Screens [Volume 2, Issue 4, 2019, Pages 58-77]
-
Sorptivity
An ANN to Predict Sorptivity and Water Absorption of Concrete Made with Industrial Waste and Artificial Sand [Volume 6, Issue 1, 2023, Pages 44-56]
-
Special Moment Resisting Frames (SMRF)
Optimization of Reduced Beam Sections (RBS) for Ductile Detailing of Seismic Joint Connections Using Finite Element Analysis (FEA) [Volume 4, Issue 3, 2021, Pages 43-54]
-
Special weather
Numerical Investigation of Car Park Fire at Special Weather Conditions [Volume 6, Issue 4, 2023, Pages 33-45]
-
Squeezing flow
On the Study of Magnetohydrodynamic Squeezing Flow of Nanofluid between Two Parallel Plates Embedded in a Porous Medium [Volume 1, Issue 4, 2018, Pages 1-15]
-
Stability
Buckling of Tapered Columns with Polygon Cross-Section [Volume 1, Issue 2, 2018, Pages 59-69]
-
Stability
Study of the Effect of Vibration Characteristics on the Stability of RC Structures [Volume 5, Issue 2, 2022, Pages 113-129]
-
Stabilization
Stabilization of Ikpayongu laterite using Cement, RHA and Carbide Waste Mixture for Road Subbase and Base Material [Volume 3, Issue 4, 2020, Pages 77-96]
-
Standard penetration test
Settlement Modelling of Raft Footing Founded on Oferekpe/Abakaliki Shale in South East Region of Nigeria [Volume 1, Issue 1, 2018, Pages 68-82]
-
Static analysis
Static Analysis of Rigid Airfield Pavement Using Finite Element Method Vs Closed-Form Solution [Volume 5, Issue 4, 2022, Pages 23-50]
-
Static stresses
Numerical Simulation of Stresses Produced on Hydraulic Clutch Discs due to Heat Generated During Operation [Volume 4, Issue 3, 2021, Pages 19-28]
-
Steady-state regime
Numerical Study of Hydraulic Percolation in Porous Media Using Two Hydraulic Structures [Volume 6, Issue 4, 2023, Pages 1-20]
-
Steel beam filled with concrete
Numerical Simulation and Parametric Study on the Moment Capacity of Composite Beam [Volume 2, Issue 3, 2019, Pages 16-26]
-
Steel Bracing
Performance-Based Design of RC Structures Subjected to Seismic Load Using a Hybrid Retrofitting Method with Friction Damper and Steel Bracing [Volume 5, Issue 1, 2022, Pages 19-35]
-
Steel Building
Numerical Analysis of Reverse Dip-slip Fault Rupture on Steel Buildings [Volume 3, Issue 4, 2020, Pages 40-57]
-
Steel frame
Modelling and Comparison of Plastic Performance in Ten Types of New Steel Braces under Pushover Analysis [Volume 6, Issue 2, 2023, Pages 79-97]
-
Steel reinforcement
Modelling and Simulation of Reinforced Concrete Bridges with varying percentages of Shape Memory Alloy Rods [Volume 1, Issue 4, 2018, Pages 62-70]
-
Steel reinforcement
Chemical Composition of Commonly Used Local and Foreign Steel Reinforcements and the Effects on the Strength Property of the Material Composites [Volume 2, Issue 3, 2019, Pages 27-37]
-
Steel Shear Wall
Evaluation of Seismic Behavior of Steel Shear Wall by Time History Analysis [Volume 2, Issue 1, 2019, Pages 38-55]
-
Stepped column
Elastic Buckling of Single-Stepped Columns with End and Intermediate Axial Loads [Volume 1, Issue 4, 2018, Pages 25-35]
-
Stiffened steel plate shear walls
The Effect of Diagonal Stiffeners on the Behaviour of Stiffened Steel Plate Shear Wall [Volume 1, Issue 1, 2018, Pages 58-67]
-
Storey drift
Blast Mitigations of Mid Rise Structures by Cladding Material [Volume 2, Issue 4, 2019, Pages 78-94]
-
Storey drift ratio
Blast Mitigations of Mid Rise Structures by Cladding Material [Volume 2, Issue 4, 2019, Pages 78-94]
-
Strength
Chemical Composition of Commonly Used Local and Foreign Steel Reinforcements and the Effects on the Strength Property of the Material Composites [Volume 2, Issue 3, 2019, Pages 27-37]
-
Strength Class
EN 338 Strength Characterization and Grading of Igba (Rhizophora Racemosa) and Adere (Syzgium Guineense) Timbers for Structural Applications [Volume 2, Issue 4, 2019, Pages 24-37]
-
Stress
Numerical Assessment of Isolated Footing Capacity due to its Size and the Impact of Neighboring Foundation [Volume 5, Issue 2, 2022, Pages 45-70]
-
Stress
Thermal Vibration of Thick Functionally Graded Material Spherical Shells by Using Third-order Shear Deformation Theory and Simply Homogeneous Equation [Volume 6, Issue 4, 2023, Pages 46-58]
-
Stress analysis
Design, Fabrication and Structural Analysis of a 5 Tons Hydraulic Press and Mould Machine for Crucible Production [Volume 3, Issue 3, 2020, Pages 46-58]
-
Structural Steel
Analysis of Diagrid Structural System for High Rise Steel Buildings [Volume 3, Issue 3, 2020, Pages 21-33]
-
Structures
Response Control of Structures Subjected to Multi-Hazards of Earthquake and Wind Using Base Isolators and Absorbers [Volume 5, Issue 2, 2022, Pages 19-44]
-
Submerged Horizontal Plate
Wave Propagation through a Submerged Horizontal Plate at the Bottom of a Water Channel [Volume 3, Issue 4, 2020, Pages 1-19]
-
Super-tall building
The Effects of Outrigger Type and Distribution on Seismic Behavior of Super-Tall Building [Volume 1, Issue 3, 2018, Pages 67-78]
-
Supplementary cementitious materials
Assessment of Crack Development Age Due to Corrosion on Reinforced High Strength Self Compacting Concrete with Inclusion of Potential Ternary Blended Cementitious Materials [Volume 6, Issue 1, 2023, Pages 18-35]
-
Supplementary Cementitous Materials
Characterisation and Use of Cassava Peel Ash in Concrete Production [Volume 3, Issue 2, 2020, Pages 12-28]
-
Sustainability
Experimental Study of Concrete Using Raw Rice Husk as Partial Replacement of Cement with Natural Fiber (Jute Fiber) as Reinforcing Material [Volume 4, Issue 3, 2021, Pages 29-42]
-
Sustainable Pavement
Economic Importance of Solid Waste in the Production of Pyrolytic Oil Utilized in Polymer Modified Bio-Binder Production in Makurdi Nigeria [Volume 6, Issue 4, 2023, Pages 21-32]
-
Syzgium guineense
EN 338 Strength Characterization and Grading of Igba (Rhizophora Racemosa) and Adere (Syzgium Guineense) Timbers for Structural Applications [Volume 2, Issue 4, 2019, Pages 24-37]
T
-
Tapered Columns
Buckling of Tapered Columns with Polygon Cross-Section [Volume 1, Issue 2, 2018, Pages 59-69]
-
Temperature
Viscosity Model of Polymer Extract from Irvingia Gabonensis [Volume 6, Issue 3, 2023, Pages 27-38]
-
Temperature
Thermal Vibration of Thick Functionally Graded Material Spherical Shells by Using Third-order Shear Deformation Theory and Simply Homogeneous Equation [Volume 6, Issue 4, 2023, Pages 46-58]
-
Temperature history
Transient Combustion Analysis for Iron Micro-Particles in a Gaseous Oxidizing Medium Using Adomian Decomposition Method [Volume 1, Issue 2, 2018, Pages 1-15]
-
Thermal conductivity
Effective Thermal Conductivity of Composites: Numerical Study [Volume 6, Issue 2, 2023, Pages 98-107]
-
Thermal radiation
Transient Combustion Analysis for Iron Micro-Particles in a Gaseous Oxidizing Medium Using Adomian Decomposition Method [Volume 1, Issue 2, 2018, Pages 1-15]
-
Thermal storage
Cost Analysis of a Large Solar Plant with Parabolic Trough Concentrators Using Molten Salt Storage Tank [Volume 4, Issue 1, 2021, Pages 37-55]
-
Thermal stresses
Numerical Simulation of Stresses Produced on Hydraulic Clutch Discs due to Heat Generated During Operation [Volume 4, Issue 3, 2021, Pages 19-28]
-
Three-Dimensional FEM modelling
Three-Dimensional Modelling of Concrete Mix Structure for Numerical Stiffness Determination [Volume 1, Issue 3, 2018, Pages 15-27]
-
Torsionally Flexible Building
New Seismic Pushover Procedures using either Floor Enforced-Displacements or Inelastic Dynamic Eccentricities on Irregular Single-Storey R/C Buildings [Volume 2, Issue 4, 2019, Pages 1-23]
-
Traffic
Modelling Effects of Land Use Changes on Traffic Based on Proposed Traffic Simulator [Volume 2, Issue 3, 2019, Pages 53-64]
-
Traffic
A Field Study of the Impact of Human Characteristics on the Use of Signs [Volume 3, Issue 2, 2020, Pages 51-62]
-
Traffic eccentricity and speed
Vehicle Bridge Interaction Analysis on Concrete and Steel Curved Bridges [Volume 4, Issue 4, 2021, Pages 94-108]
-
Traffic Forecast
Study of Traffic Forecast for Intelligent Transportation System [Volume 5, Issue 3, 2022, Pages 50-63]
-
Traffic Signs
A Field Study of the Impact of Human Characteristics on the Use of Signs [Volume 3, Issue 2, 2020, Pages 51-62]
-
Traffic simulator
Modelling Effects of Land Use Changes on Traffic Based on Proposed Traffic Simulator [Volume 2, Issue 3, 2019, Pages 53-64]
-
Traffic violations
Data Visualization of Traffic Violations in Maryland, U.S. [Volume 6, Issue 1, 2023, Pages 57-69]
-
Transportation
A Field Study of the Impact of Human Characteristics on the Use of Signs [Volume 3, Issue 2, 2020, Pages 51-62]
-
Tuned liquid column damper
Presenting an Optimal Design Procedure for a Variety of TLCDs to Improve the Seismic Response of Offshore Platforms [Volume 6, Issue 3, 2023, Pages 1-26]
-
Tuned Mass Dampers
Use of Tuned Mass Dampers in Controlling the Vibrations of Steel Structures with Vertical Irregularity of Mass [Volume 1, Issue 2, 2018, Pages 83-94]
-
Tunnel
Numerical Analysis of Segmental Tunnel Linings employing a Hybrid Modeling Approach [Volume 4, Issue 1, 2021, Pages 1-18]
-
Tunnel heave
Numerical Analysis of Segmental Tunnel Linings employing a Hybrid Modeling Approach [Volume 4, Issue 1, 2021, Pages 1-18]
-
Twinning
Effect of Threshold Twin Volume Fraction in Crystal Plasticity Modeling [Volume 4, Issue 1, 2021, Pages 84-100]
-
Typical stress-strain equation
Design Formula at Ultimate Stresses for Ekki (Lophira Alata) Timber Beam [Volume 2, Issue 2, 2019, Pages 25-35]
U
-
Ultimate Capacity
An Innovative Forecasting Formula for Axial Compression Capacity of Circular Steel Tubes Filled with Concrete through Neural Networks [Volume 5, Issue 4, 2022, Pages 51-66]
-
Unsteady flow
Development of Dam-Break Model Considering Real Case Studies with Asymmetric Reservoirs [Volume 4, Issue 4, 2021, Pages 39-63]
V
-
Velocity
Numerical Analysis of Flow and Heat Transfer Characteristics between Two Parallel Plates with Constriction(s) [Volume 4, Issue 3, 2021, Pages 55-69]
-
Velocity streamlines
Wind Induced Pressure Variation on High-Rise Geometrically Modified Building Having Interference through CFD Simulation [Volume 4, Issue 4, 2021, Pages 26-38]
-
Viscosity
Numerical Modelling of Mixability of Highly Viscous Syrup in a U-Shaped Tank with Centrally Rotated Streamers [Volume 6, Issue 1, 2023, Pages 70-84]
-
Viscous dampers
Multi-objective Optimization of Steel Frames with Added Viscous Dampers using Imperialist Competitive Algorithm [Volume 5, Issue 1, 2022, Pages 69-88]
-
Visibility
Numerical Investigation of Car Park Fire at Special Weather Conditions [Volume 6, Issue 4, 2023, Pages 33-45]
-
VPSC
Effect of Threshold Twin Volume Fraction in Crystal Plasticity Modeling [Volume 4, Issue 1, 2021, Pages 84-100]
-
V-shaped bridge columns
Investigation on the Seismic Performance of Joints with Different Shapes in Bridge Columns [Volume 5, Issue 1, 2022, Pages 1-18]
W
-
Water
Viscosity Model of Polymer Extract from Irvingia Gabonensis [Volume 6, Issue 3, 2023, Pages 27-38]
-
Water absorption rate
The Effect of Zeolite on Different Mechanical Properties and Permeability of Self-Compacting Concrete [Volume 3, Issue 1, 2020, Pages 53-68]
-
Water Channel
Wave Propagation through a Submerged Horizontal Plate at the Bottom of a Water Channel [Volume 3, Issue 4, 2020, Pages 1-19]
-
Water Surface Waves
Wave Propagation through a Submerged Horizontal Plate at the Bottom of a Water Channel [Volume 3, Issue 4, 2020, Pages 1-19]
-
Wave scattering
Investigating on Hydrodynamic Behavior of Slotted Breakwater Walls Under Sea Waves [Volume 2, Issue 1, 2019, Pages 30-37]
-
Wave-structure
Investigating on Hydrodynamic Behavior of Slotted Breakwater Walls Under Sea Waves [Volume 2, Issue 1, 2019, Pages 30-37]
-
Wind Incidence Angle
Wind Pressure Coefficients on Pyramidal Roof of Square Plan Low Rise Double Storey Building [Volume 2, Issue 1, 2019, Pages 1-16]
-
Wind Load
Response Control of Structures Subjected to Multi-Hazards of Earthquake and Wind Using Base Isolators and Absorbers [Volume 5, Issue 2, 2022, Pages 19-44]
-
Wind pressure
Wind Induced Pressure Variation on High-Rise Geometrically Modified Building Having Interference through CFD Simulation [Volume 4, Issue 4, 2021, Pages 26-38]
-
Winkler foundation model
Comparative Study of a Subgrade Coefficient Reaction on an Arched Dam Using the Winkler Foundation Model [Volume 3, Issue 2, 2020, Pages 29-37]
-
Wood Residue
Economic Importance of Solid Waste in the Production of Pyrolytic Oil Utilized in Polymer Modified Bio-Binder Production in Makurdi Nigeria [Volume 6, Issue 4, 2023, Pages 21-32]
-
Workability
Application of FOSM and Chebyshev’s Theorem Concept to Predict Compressive Strength Attributes of Corncob Ash Embedded Cement Concrete [Volume 3, Issue 1, 2020, Pages 16-24]
X
-
XRD
An ANN to Predict Sorptivity and Water Absorption of Concrete Made with Industrial Waste and Artificial Sand [Volume 6, Issue 1, 2023, Pages 44-56]
Z
-
Zero-emission truck
Aerodynamic Analysis of Autonomous Battery Electric Truck Concepts for Drag Reduction [Volume 5, Issue 2, 2022, Pages 71-90]
-
Zeta potential
The Relation between Deposited Weight and Quality of Coating in EPD Method Derived by Genetic Programming [Volume 4, Issue 1, 2021, Pages 73-83]
Your query does not match with any item