A
-
Abbaszadeh, Hadi
Debonding and Fracture Behavior of Concrete Specimens Retrofitted by FRP Composite [Volume 1, Issue 2, 2018, Pages 27-40]
-
Abbaszadeh, Hadi
The Effects of Outrigger Type and Distribution on Seismic Behavior of Super-Tall Building [Volume 1, Issue 3, 2018, Pages 67-78]
-
Abdolrezayi, Alireza
Comparative Three-Dimensional Finite Element Analysis of Piled Raft Foundations [Volume 4, Issue 1, 2021, Pages 19-36]
-
Abdullahi Alao, Jimoh
Design Formula at Ultimate Stresses for Ekki (Lophira Alata) Timber Beam [Volume 2, Issue 2, 2019, Pages 25-35]
-
Abedi, Maryam
Wave Propagation through a Submerged Horizontal Plate at the Bottom of a Water Channel [Volume 3, Issue 4, 2020, Pages 1-19]
-
Achor, Tessy
Effect of Aluminum Oxide Powder and Nanoparticles on Kaolinite Mobilization in Sand [Volume 5, Issue 4, 2022, Pages 67-78]
-
Adedeji, Adeola Abdullahi
Modelling and Simulation of Reinforced Concrete Bridges with varying percentages of Shape Memory Alloy Rods [Volume 1, Issue 4, 2018, Pages 62-70]
-
Adeke, Paul Terkumbur
Simulation of Priority Queuing at TOTAL Petrol Filling Station in Makurdi Town Using SimEvents Toolkit [Volume 2, Issue 1, 2019, Pages 56-66]
-
Adineh, Mostafa
Investigating on Hydrodynamic Behavior of Slotted Breakwater Walls Under Sea Waves [Volume 2, Issue 1, 2019, Pages 30-37]
-
AghaRezaei, Hamed
The Effect of Diagonal Stiffeners on the Behaviour of Stiffened Steel Plate Shear Wall [Volume 1, Issue 1, 2018, Pages 58-67]
-
Aghayan, Saideh
Settlement Modelling of Raft Footing Founded on Oferekpe/Abakaliki Shale in South East Region of Nigeria [Volume 1, Issue 1, 2018, Pages 68-82]
-
Ahani, Ali
Debonding and Fracture Behavior of Concrete Specimens Retrofitted by FRP Composite [Volume 1, Issue 2, 2018, Pages 27-40]
-
Ahani, Ali
The Effects of Outrigger Type and Distribution on Seismic Behavior of Super-Tall Building [Volume 1, Issue 3, 2018, Pages 67-78]
-
Ahani, Elshan
The Effects of Outrigger Type and Distribution on Seismic Behavior of Super-Tall Building [Volume 1, Issue 3, 2018, Pages 67-78]
-
Ajide, Sofiyyat O.
Reliability-Based Investigation on Compressive Strength Characteristics of Structural-Sized Iroko (Meliceae Excelsa) and Mahogany (Khaya Ivorensis) Timber Column Found in Nigeria [Volume 1, Issue 1, 2018, Pages 23-37]
-
Akano, Theddeus Tochukwu
Numerical Investigation into the Effect of Laminated Casing on the Impact Resistance of Smartphone Screens [Volume 2, Issue 4, 2019, Pages 58-77]
-
Akhil Kumar, Akula
Assessment of Crack Development Age Due to Corrosion on Reinforced High Strength Self Compacting Concrete with Inclusion of Potential Ternary Blended Cementitious Materials [Volume 6, Issue 1, 2023, Pages 18-35]
-
Akpen, Delian Gabriel
The Effect of Heavy Metal Concentration on the Soil of Odagbo Area, Kogi State Nigeria [Volume 4, Issue 4, 2021, Pages 84-93]
-
Akter, Shilpi
Identifying the Amount of Heat Flux and Thermal Conduction through Fabrics with Appropriate Heat Equation [Volume 4, Issue 2, 2021, Pages 53-67]
-
Alaneme, George Uwadiegwu
Modelling of the Compressive Strength of Palm-Nut-Fibre Concrete Using Scheffe’s Theory [Volume 3, Issue 1, 2020, Pages 36-52]
-
Alaneme, George Uwadiegwu
Characterisation and Use of Cassava Peel Ash in Concrete Production [Volume 3, Issue 2, 2020, Pages 12-28]
-
Ali, Ayesha Binta
Numerical Assessment of Isolated Footing Capacity due to its Size and the Impact of Neighboring Foundation [Volume 5, Issue 2, 2022, Pages 45-70]
-
Alizadeh, Sahand
A Field Study of the Impact of Human Characteristics on the Use of Signs [Volume 3, Issue 2, 2020, Pages 51-62]
-
Alqarni, Mousa
Numerical Simulation and Parametric Study on the Moment Capacity of Composite Beam [Volume 2, Issue 3, 2019, Pages 16-26]
-
Ameur, Houari
Numerical Investigation of the Cooling of Shear Thinning Fluids in Cylindrical Horizontal Ducts [Volume 1, Issue 4, 2018, Pages 53-61]
-
Amin Jarrahi, Mohammad
Data Visualization of Traffic Violations in Maryland, U.S. [Volume 6, Issue 1, 2023, Pages 57-69]
-
Amirabadi, Hossein
Dynamics of a Sandwich Cylindrical Shell with a Functionally Graded Auxetic Honeycomb Core [Volume 7, Issue 1, 2024, Pages 35-61]
-
Amiri, Behtash
The Effect of Diagonal Stiffeners on the Behaviour of Stiffened Steel Plate Shear Wall [Volume 1, Issue 1, 2018, Pages 58-67]
-
Amiri, Behtash
Steel Plate Shear Wall with Different Infill Steel Plates [Volume 1, Issue 3, 2018, Pages 1-14]
-
Anbukumar, S.
Study of Traffic Forecast for Intelligent Transportation System [Volume 5, Issue 3, 2022, Pages 50-63]
-
Anirood, Kameel
Aerodynamic Analysis of Autonomous Battery Electric Truck Concepts for Drag Reduction [Volume 5, Issue 2, 2022, Pages 71-90]
-
Ankidawa, B. A.
Estimation of Aquifer Transmissivity Using Dar Zarrouk Parameters Derived from Resistivity Soundings on the Floodplain of River Dadin Kowa, Gombe State, Northeastern Nigeria [Volume 1, Issue 4, 2018, Pages 36-52]
-
Ankidawa, Buba
Design and Evaluation of Drip Irrigation System for Date Palm Plantations in MAUTECH, Yola, Adamawa State, Northeastern Nigeria [Volume 1, Issue 2, 2018, Pages 70-82]
-
Anyaegbuna, Ben E
Numerical Modelling of Mixability of Highly Viscous Syrup in a U-Shaped Tank with Centrally Rotated Streamers [Volume 6, Issue 1, 2023, Pages 70-84]
-
Arif, Eka Juni
Blockchain-Building Information Modeling (BIM): Aplication in Cost Eficiency of Retrofitting Green Chemical Industrial Buildings [Volume 6, Issue 2, 2023, Pages 1-24]
-
Arunprasath, K
Mechanical Properties of Partial Replacement of Cement by adding Neem Gum/Accaacia Gum a Naturally Available Polymeric Fillers [Volume 6, Issue 3, 2023, Pages 73-85]
-
Asadi, Abolfazl
Comparative Study of a Subgrade Coefficient Reaction on an Arched Dam Using the Winkler Foundation Model [Volume 3, Issue 2, 2020, Pages 29-37]
-
Asadi, Abolfazl
Evaluation of the Effect of Modulus of Elasticity in Clay Core on the Arching in the Crest of Earth Dams [Volume 3, Issue 3, 2020, Pages 12-20]
-
Asaeian, Arman
Wave Propagation through a Submerged Horizontal Plate at the Bottom of a Water Channel [Volume 3, Issue 4, 2020, Pages 1-19]
-
Asif, Taskid Hossain
Application of Numerical Method in Assessing the Variations in Pile Group Efficiency under Different Circumstances [Volume 5, Issue 1, 2022, Pages 50-68]
-
Asif, Taskid Hossain
Numerical Analysis of Slope Stability with Nailing Method Using Bamboo as Nailing Material [Volume 6, Issue 1, 2023, Pages 1-17]
-
Askari, Elham
Facial Emotion Recognition Using Convolutional Brain Emotional Learning (CBEL) Model [Volume 5, Issue 3, 2022, Pages 38-49]
-
Attar, Mostafa
Wave Propagation through a Submerged Horizontal Plate at the Bottom of a Water Channel [Volume 3, Issue 4, 2020, Pages 1-19]
-
Awall, Md. Robiul
Study on Natural Frequency of Frame Structures [Volume 2, Issue 2, 2019, Pages 36-48]
-
Ayinde, Raheem A
Comparative Studies of the Effects of Blocking and Water Repellant Agents on Tensile Strengths of Fanpalm [Volume 2, Issue 1, 2019, Pages 17-29]
-
Azadi Kakavand, Mohammad Reza
Seismic Fragility Assessment of Local and Global Failures in Low-rise Non-ductile Existing RC Buildings: Empirical Shear-Axial Modelling vs. ASCE/SEI 41 Approach [Volume 1, Issue 1, 2018, Pages 38-57]
-
Azimi, Alla
Flexural Capacity Prediction for Reinforced Concrete Beams by Group Method of Data Handling Approach [Volume 1, Issue 3, 2018, Pages 100-110]
-
Azimzadeh Koocheh, Mohammad
Steel Plate Shear Wall with Different Infill Steel Plates [Volume 1, Issue 3, 2018, Pages 1-14]
-
Aziz, Md. Abdul
Flood Hazard Mapping of the Floodplain of the Jamuna River [Volume 5, Issue 1, 2022, Pages 89-101]
-
Azunna, Sunday Ugochukwu
Stabilization of Ikpayongu laterite using Cement, RHA and Carbide Waste Mixture for Road Subbase and Base Material [Volume 3, Issue 4, 2020, Pages 77-96]
-
Azunna, Sunday Ugochukwu
Characteristic Properties of Concrete with Recycled Burnt Bricks as Coarse Aggregates Replacement [Volume 4, Issue 1, 2021, Pages 56-72]
B
-
Babaafjaei, Abbas
Modelling and Comparison of Plastic Performance in Ten Types of New Steel Braces under Pushover Analysis [Volume 6, Issue 2, 2023, Pages 79-97]
-
Babaafjaei, Abbas
Evaluation and Comparison of Seismic Performance in Irregular Steel Structures with Modern Concentrically Braces [Volume 6, Issue 4, 2023, Pages 59-79]
-
Babaei, Alireza
Adaptive Neuro-Fuzzy Inference System (ANFIS) Integrated with Genetic Algorithm to Optimize Piezoelectric Cantilever-Oscillator-Spring Energy Harvester: Verification with Closed-Form Solution [Volume 5, Issue 4, 2022, Pages 1-22]
-
Babaei, Mehdi
Use of Tuned Mass Dampers in Controlling the Vibrations of Steel Structures with Vertical Irregularity of Mass [Volume 1, Issue 2, 2018, Pages 83-94]
-
Babaei, Mehdi
Multi-objective Optimization of Steel Frames with Added Viscous Dampers using Imperialist Competitive Algorithm [Volume 5, Issue 1, 2022, Pages 69-88]
-
Babatunde, Olawale Yusuf
EN 338 Strength Characterization and Grading of Igba (Rhizophora Racemosa) and Adere (Syzgium Guineense) Timbers for Structural Applications [Volume 2, Issue 4, 2019, Pages 24-37]
-
Baghbanan, Alireza
Rock Slope Stability Analysis in the Left Abutment of Bakhtiary Dam, Iran [Volume 4, Issue 2, 2021, Pages 1-19]
-
Bagherzadeh Khalkhali, Ahad
Evaluation of Limit Equilibrium and Finite Element Methods in Slope Stability Analysis - Case Study of Zaremroud Landslide, Iran [Volume 2, Issue 3, 2019, Pages 1-15]
-
Baiat Ghiasi, Seyed hamid
Investigating on Hydrodynamic Behavior of Slotted Breakwater Walls Under Sea Waves [Volume 2, Issue 1, 2019, Pages 30-37]
-
Bakalis, Athanasios P.
New Seismic Pushover Procedures using either Floor Enforced-Displacements or Inelastic Dynamic Eccentricities on Irregular Single-Storey R/C Buildings [Volume 2, Issue 4, 2019, Pages 1-23]
-
Bakhshi, Hosein
Evaluation of Seismic Behavior of Steel Shear Wall by Time History Analysis [Volume 2, Issue 1, 2019, Pages 38-55]
-
Bali, Naila N
3D Modeling and Augmented Reality for Learning [Volume 6, Issue 3, 2023, Pages 52-61]
-
Barati, Reza
Discharge Coefficient Estimation of Sharp-Crested Curved-Plan Spillways using Soft Computing Approaches [Volume 6, Issue 2, 2023, Pages 25-44]
-
Basak, Aditi
Application of Numerical Method in Assessing the Variations in Pile Group Efficiency under Different Circumstances [Volume 5, Issue 1, 2022, Pages 50-68]
-
Bashir, Muhammad Aun
Numerical Simulation and Parametric Study on the Moment Capacity of Composite Beam [Volume 2, Issue 3, 2019, Pages 16-26]
-
Basiri, Mina
Data Visualization of Traffic Violations in Maryland, U.S. [Volume 6, Issue 1, 2023, Pages 57-69]
-
Bastos, Leonardo de Souza
Human Comfort Assessment of Buildings Considering the Effect of the Masonry Infills and the Soil-Structure Interaction [Volume 2, Issue 3, 2019, Pages 38-52]
-
Behbahani, Fatemeh
Numerical Investigation of Car Park Fire at Special Weather Conditions [Volume 6, Issue 4, 2023, Pages 33-45]
-
Behfarnia, Kiachehr
The Use of Machine Learning Models in Estimating the Compressive Strength of Recycled Brick Aggregate Concrete [Volume 4, Issue 4, 2021, Pages 1-25]
-
Behzadi, Saeed
Modelling Effects of Land Use Changes on Traffic Based on Proposed Traffic Simulator [Volume 2, Issue 3, 2019, Pages 53-64]
-
Beiranvand, Behrang
Numerical Analysis of the Effect of Blast Wave on Pressure Vessels [Volume 6, Issue 3, 2023, Pages 39-51]
-
Beiranvand, Behrang
Optimizing the Design of Nickel and Composite Pressure Vessels [Volume 7, Issue 1, 2024, Pages 1-12]
-
Benmansour, Nadia
Effective Thermal Conductivity of Composites: Numerical Study [Volume 6, Issue 2, 2023, Pages 98-107]
-
Bhanuse, Maheshkumar M
Analysis of Diagrid Structural System for High Rise Steel Buildings [Volume 3, Issue 3, 2020, Pages 21-33]
-
Bhanuse, Maheshkumar M
Seismic Analysis of Eccentric Steel Structure on a Shaking Table [Volume 3, Issue 2, 2020, Pages 1-11]
-
Bharti, Sandeep
Static Analysis of Rigid Pavement Runway under the Influence of Aircraft Loading by Finite Element Technique [Volume 5, Issue 4, 2022, Pages 79-101]
-
Bodda, Saran Srikanth
Fragility of a Weir Structure due to Scouring [Volume 3, Issue 1, 2020, Pages 1-15]
-
Bunyamin, Salahudeen
Settlement Modelling of Raft Footing Founded on Oferekpe/Abakaliki Shale in South East Region of Nigeria [Volume 1, Issue 1, 2018, Pages 68-82]
C
-
Chabokan, Elahe
Seismic Assessment of Steel Moment Frames with Irregularity in Mass and Stiffness [Volume 1, Issue 4, 2018, Pages 71-89]
-
Chaid, Rabah
Contribution of the Blast Furnace Slag on the Behavior of HPC in a Hydrochloric Environment [Volume 4, Issue 2, 2021, Pages 27-38]
-
Chapuis, Adrien
Effect of Threshold Twin Volume Fraction in Crystal Plasticity Modeling [Volume 4, Issue 1, 2021, Pages 84-100]
-
Chavan, Shivprasad P
An ANN to Predict Sorptivity and Water Absorption of Concrete Made with Industrial Waste and Artificial Sand [Volume 6, Issue 1, 2023, Pages 44-56]
-
Chawhan, Babu Shivaram
Experimental and Numerical Investigations of Laterally Loaded Pile Group in Multilayered Cohesionless soil [Volume 1, Issue 3, 2018, Pages 28-45]
-
Chenaghlou, Mohammad Reza
Presenting an Optimal Design Procedure for a Variety of TLCDs to Improve the Seismic Response of Offshore Platforms [Volume 6, Issue 3, 2023, Pages 1-26]
-
Cheraghi Seifabad, Masoud
Rock Slope Stability Analysis in the Left Abutment of Bakhtiary Dam, Iran [Volume 4, Issue 2, 2021, Pages 1-19]
-
Chitty, Francisco D.
Improvement of Concrete Characterization Using Nanosilica [Volume 4, Issue 2, 2021, Pages 39-52]
-
Chowdhury, Sharmin Reza
Numerical Analysis of Retrofitted RC Column under Lateral Load [Volume 5, Issue 3, 2022, Pages 82-95]
-
Cimagala, Jeffrey P
Optimization of Reduced Beam Sections (RBS) for Ductile Detailing of Seismic Joint Connections Using Finite Element Analysis (FEA) [Volume 4, Issue 3, 2021, Pages 43-54]
-
Cronico, Jonjon C.
Assessing Flood Occurrence and Modeling Impact of Urban Drainage Structure [Volume 3, Issue 3, 2020, Pages 1-11]
D
-
Dahunsi, Olurotimi Akintunde
Design, Fabrication and Structural Analysis of a 5 Tons Hydraulic Press and Mould Machine for Crucible Production [Volume 3, Issue 3, 2020, Pages 46-58]
-
Dakshayini, M S
Application of FOSM and Chebyshev’s Theorem Concept to Predict Compressive Strength Attributes of Corncob Ash Embedded Cement Concrete [Volume 3, Issue 1, 2020, Pages 16-24]
-
Debnath, Tapas
Numerical Assessment of Isolated Footing Capacity due to its Size and the Impact of Neighboring Foundation [Volume 5, Issue 2, 2022, Pages 45-70]
-
Du, Xiuli
Investigation on the Seismic Performance of Joints with Different Shapes in Bridge Columns [Volume 5, Issue 1, 2022, Pages 1-18]
-
Du, Xiuli
Evaluation the Impact of Flexible Joints and Deck on the Seismic Response of Bridges [Volume 5, Issue 2, 2022, Pages 1-18]
-
Dubecky, Daniel
Prefabricated Composite Beams Based on Innovative Shear Connection [Volume 4, Issue 2, 2021, Pages 20-26]
-
Duru, Christopher Ndubuisi
Economic Importance of Solid Waste in the Production of Pyrolytic Oil Utilized in Polymer Modified Bio-Binder Production in Makurdi Nigeria [Volume 6, Issue 4, 2023, Pages 21-32]
E
-
Edeh, Joseph
Simulation of Priority Queuing at TOTAL Petrol Filling Station in Makurdi Town Using SimEvents Toolkit [Volume 2, Issue 1, 2019, Pages 56-66]
-
Ekwule, Oloche Robert
The Effect of Heavy Metal Concentration on the Soil of Odagbo Area, Kogi State Nigeria [Volume 4, Issue 4, 2021, Pages 84-93]
-
Elattar, Hassan F.
Cost Analysis of a Large Solar Plant with Parabolic Trough Concentrators Using Molten Salt Storage Tank [Volume 4, Issue 1, 2021, Pages 37-55]
-
Eliseev, Andrey Vladimirovich
Approaches in the development of motion sensors in the dynamics of granular media [Volume 2, Issue 2, 2019, Pages 1-14]
-
Eliseev, S.V.
Approaches in the development of motion sensors in the dynamics of granular media [Volume 2, Issue 2, 2019, Pages 1-14]
-
El-Sayed, Abd El-Nabi Zaghloul
Cost Analysis of a Large Solar Plant with Parabolic Trough Concentrators Using Molten Salt Storage Tank [Volume 4, Issue 1, 2021, Pages 37-55]
-
Emami Azadi, M.Reza
Debonding and Fracture Behavior of Concrete Specimens Retrofitted by FRP Composite [Volume 1, Issue 2, 2018, Pages 27-40]
-
Esmaeilabadi, Reza
The Effect of Diagonal Stiffeners on the Behaviour of Stiffened Steel Plate Shear Wall [Volume 1, Issue 1, 2018, Pages 58-67]
-
Esmaeilabadi, Reza
Steel Plate Shear Wall with Different Infill Steel Plates [Volume 1, Issue 3, 2018, Pages 1-14]
F
-
Fallahi, Mohsen
Rock Slope Stability Analysis in the Left Abutment of Bakhtiary Dam, Iran [Volume 4, Issue 2, 2021, Pages 1-19]
-
Farahnaki, Reza
Flexural Capacity Prediction for Reinforced Concrete Beams by Group Method of Data Handling Approach [Volume 1, Issue 3, 2018, Pages 100-110]
-
Farhoudi, Zeinab
Facial Emotion Recognition Using Convolutional Brain Emotional Learning (CBEL) Model [Volume 5, Issue 3, 2022, Pages 38-49]
-
Faria, Albert Wilian
Numerical Study of Hydraulic Percolation in Porous Media Using Two Hydraulic Structures [Volume 6, Issue 4, 2023, Pages 1-20]
-
Faridmehr, Iman
Seismic Assessment of Steel Moment Frames with Irregularity in Mass and Stiffness [Volume 1, Issue 4, 2018, Pages 71-89]
-
Farzin, Saeed
Development of Dam-Break Model Considering Real Case Studies with Asymmetric Reservoirs [Volume 4, Issue 4, 2021, Pages 39-63]
-
Ferdowsi, Ahmad
Development of Dam-Break Model Considering Real Case Studies with Asymmetric Reservoirs [Volume 4, Issue 4, 2021, Pages 39-63]
-
Foroudi, Ali
Discharge Coefficient Estimation of Sharp-Crested Curved-Plan Spillways using Soft Computing Approaches [Volume 6, Issue 2, 2023, Pages 25-44]
-
Fridhi, Adel
3D Modeling and Augmented Reality for Learning [Volume 6, Issue 3, 2023, Pages 52-61]
-
Frohid, Amir Ismail
A Field Study of the Impact of Human Characteristics on the Use of Signs [Volume 3, Issue 2, 2020, Pages 51-62]
-
Fu, Chung C.
Vehicle Bridge Interaction Analysis on Concrete and Steel Curved Bridges [Volume 4, Issue 4, 2021, Pages 94-108]
-
Funari, Marco Francesco
A Moving Cohesive Mesh Formulation to Predict Debonding Phenomena in Layered Structures [Volume 1, Issue 2, 2018, Pages 16-26]
G
-
Gebregziabher, Henok Fikre
Finite Element Based Investigation of Belled Piers in Expansive Soils [Volume 5, Issue 3, 2022, Pages 64-81]
-
Gebremedhin, Gideon Amha
Finite Element Based Investigation of Belled Piers in Expansive Soils [Volume 5, Issue 3, 2022, Pages 64-81]
-
Ghasemi, Maryam
Detecting Human Behavioral Pattern in Rock, Paper, Scissors Game Using Artificial Intelligence [Volume 3, Issue 1, 2020, Pages 25-35]
-
Ghoddusi, Meysam
Evaluation of Seismic Behavior of Steel Shear Wall by Time History Analysis [Volume 2, Issue 1, 2019, Pages 38-55]
-
Granitzer, Andreas-Nizar
Numerical Analysis of Segmental Tunnel Linings employing a Hybrid Modeling Approach [Volume 4, Issue 1, 2021, Pages 1-18]
-
Gupta, Abhinav
Fragility of a Weir Structure due to Scouring [Volume 3, Issue 1, 2020, Pages 1-15]
-
Gupta, Sristi Das
Experimental Study of Concrete Using Raw Rice Husk as Partial Replacement of Cement with Natural Fiber (Jute Fiber) as Reinforcing Material [Volume 4, Issue 3, 2021, Pages 29-42]
-
Gupta, Vinay Vedmani
Performance-Based Design of RC Structures Subjected to Seismic Load Using a Hybrid Retrofitting Method with Friction Damper and Steel Bracing [Volume 5, Issue 1, 2022, Pages 19-35]
-
Gupta, Vipin Vedmani
Response Control of Structures Subjected to Multi-Hazards of Earthquake and Wind Using Base Isolators and Absorbers [Volume 5, Issue 2, 2022, Pages 19-44]
H
-
Habibi, Saed
Numerical Analysis of Reverse Dip-slip Fault Rupture on Steel Buildings [Volume 3, Issue 4, 2020, Pages 40-57]
-
Haddadou, Naima
Contribution of the Blast Furnace Slag on the Behavior of HPC in a Hydrochloric Environment [Volume 4, Issue 2, 2021, Pages 27-38]
-
Hadi, Abdulazeez Moh
Reliability Assessment of Natural Aggregate Pulverized Glass Powder Concrete Beam Subjected to Shearing Forces [Volume 6, Issue 2, 2023, Pages 45-53]
-
Haji, Fatemeh
Data Visualization of Traffic Violations in Maryland, U.S. [Volume 6, Issue 1, 2023, Pages 57-69]
-
Hamza, Malika-Sabria
Contribution of the Blast Furnace Slag on the Behavior of HPC in a Hydrochloric Environment [Volume 4, Issue 2, 2021, Pages 27-38]
-
Hamzei, Mahdi
Numerical Investigation of Car Park Fire at Special Weather Conditions [Volume 6, Issue 4, 2023, Pages 33-45]
-
Haque, Akramul
Flood Hazard Mapping of the Floodplain of the Jamuna River [Volume 5, Issue 1, 2022, Pages 89-101]
-
Hasan, Farhad
Lattice Boltzmann Simulation of Fluid Flow and Heat Transfer through Partially Filled Porous Media [Volume 2, Issue 4, 2019, Pages 38-57]
-
Hasan, Mahadi
Numerical Assessment of Isolated Footing Capacity due to its Size and the Impact of Neighboring Foundation [Volume 5, Issue 2, 2022, Pages 45-70]
-
Hasnat, Arif
A Circumstantial Review on Ride-sharing Profile in Dhaka City [Volume 3, Issue 4, 2020, Pages 58-76]
-
Hassan, A. A.
Estimation of Aquifer Transmissivity Using Dar Zarrouk Parameters Derived from Resistivity Soundings on the Floodplain of River Dadin Kowa, Gombe State, Northeastern Nigeria [Volume 1, Issue 4, 2018, Pages 36-52]
-
Hassan, Sheikh
Lattice Boltzmann Simulation of Fluid Flow and Heat Transfer through Partially Filled Porous Media [Volume 2, Issue 4, 2019, Pages 38-57]
-
Heidari, Ali
Time-Frequency Localization of Earthquake Record by Continuous Wavelet Transforms [Volume 2, Issue 2, 2019, Pages 49-61]
-
Himika, Taasnim Ahmed
Lattice Boltzmann Simulation of Fluid Flow and Heat Transfer through Partially Filled Porous Media [Volume 2, Issue 4, 2019, Pages 38-57]
-
Hong, C.C.
Thermal Vibration of Thick Functionally Graded Material Spherical Shells by Using Third-order Shear Deformation Theory and Simply Homogeneous Equation [Volume 6, Issue 4, 2023, Pages 46-58]
-
Horsfall, Boma
Economic Importance of Solid Waste in the Production of Pyrolytic Oil Utilized in Polymer Modified Bio-Binder Production in Makurdi Nigeria [Volume 6, Issue 4, 2023, Pages 21-32]
-
Hossain, Ibrahim
Experimental Study of Concrete Using Raw Rice Husk as Partial Replacement of Cement with Natural Fiber (Jute Fiber) as Reinforcing Material [Volume 4, Issue 3, 2021, Pages 29-42]
-
Hosseini, SeyyedReza
Modelling and Comparison of Plastic Performance in Ten Types of New Steel Braces under Pushover Analysis [Volume 6, Issue 2, 2023, Pages 79-97]
-
Hosseini, SeyyedReza
Evaluation and Comparison of Seismic Performance in Irregular Steel Structures with Modern Concentrically Braces [Volume 6, Issue 4, 2023, Pages 59-79]
-
Houari, Ouabel
Using Pressuremeter Test Results to Estimate Bearing Capacity in the Vicinity of a Slope- Numerical Analysis- [Volume 2, Issue 2, 2019, Pages 15-24]
-
Houari, Ouabel
Probabilistic Analysis of Bearing Capacity with the Pressuremeter Method [Volume 5, Issue 4, 2022, Pages 102-112]
-
Huang, Xinyi
Vehicle Bridge Interaction Analysis on Concrete and Steel Curved Bridges [Volume 4, Issue 4, 2021, Pages 94-108]
-
Humyra, Tasnuva
Study on Natural Frequency of Frame Structures [Volume 2, Issue 2, 2019, Pages 36-48]
-
Husin, Albert Eddy
Blockchain-Building Information Modeling (BIM): Aplication in Cost Eficiency of Retrofitting Green Chemical Industrial Buildings [Volume 6, Issue 2, 2023, Pages 1-24]
I
-
Ibitolu, Babatunde
EN 338 Strength Characterization and Grading of Igba (Rhizophora Racemosa) and Adere (Syzgium Guineense) Timbers for Structural Applications [Volume 2, Issue 4, 2019, Pages 24-37]
-
Ida blessy, S
Mechanical Properties of Partial Replacement of Cement by adding Neem Gum/Accaacia Gum a Naturally Available Polymeric Fillers [Volume 6, Issue 3, 2023, Pages 73-85]
-
Incharashree, K.Y.
Analytical Study of Fatigue Crack Growth Behavior of Steel Structure Reinforced with FRP [Volume 5, Issue 3, 2022, Pages 24-37]
-
Ishaku, J. M.
Estimation of Aquifer Transmissivity Using Dar Zarrouk Parameters Derived from Resistivity Soundings on the Floodplain of River Dadin Kowa, Gombe State, Northeastern Nigeria [Volume 1, Issue 4, 2018, Pages 36-52]
-
Islam, Shafiqul
Application of Numerical Method in Assessing the Variations in Pile Group Efficiency under Different Circumstances [Volume 5, Issue 1, 2022, Pages 50-68]
-
Islam, Shafiqul
Numerical Assessment of Isolated Footing Capacity due to its Size and the Impact of Neighboring Foundation [Volume 5, Issue 2, 2022, Pages 45-70]
-
Islam, Shafiqul
Numerical Analysis of Slope Stability with Nailing Method Using Bamboo as Nailing Material [Volume 6, Issue 1, 2023, Pages 1-17]
-
Islam, Shariful
Identifying the Amount of Heat Flux and Thermal Conduction through Fabrics with Appropriate Heat Equation [Volume 4, Issue 2, 2021, Pages 53-67]
-
Islam, Tarikul
Experimental Study of Concrete Using Raw Rice Husk as Partial Replacement of Cement with Natural Fiber (Jute Fiber) as Reinforcing Material [Volume 4, Issue 3, 2021, Pages 29-42]
-
Islam, Tarikul
Numerical Analysis of Retrofitted RC Column under Lateral Load [Volume 5, Issue 3, 2022, Pages 82-95]
J
-
Jabbari, Mostafa
Modelling Effects of Land Use Changes on Traffic Based on Proposed Traffic Simulator [Volume 2, Issue 3, 2019, Pages 53-64]
-
Jafari-Talookolaei, Ramazan-Ali
Wave Propagation through a Submerged Horizontal Plate at the Bottom of a Water Channel [Volume 3, Issue 4, 2020, Pages 1-19]
-
Jandaghian, Zahra
Flow and Pollutant Dispersion Model in a 2D Urban Street Canyons Using Computational Fluid Dynamics [Volume 1, Issue 1, 2018, Pages 83-93]
-
Janghu, Ravinder S
Numerical Simulation of Stresses Produced on Hydraulic Clutch Discs due to Heat Generated During Operation [Volume 4, Issue 3, 2021, Pages 19-28]
-
Javaheri-Tafti, Mohamad Reza
An Innovative Forecasting Formula for Axial Compression Capacity of Circular Steel Tubes Filled with Concrete through Neural Networks [Volume 5, Issue 4, 2022, Pages 51-66]
-
Jayesimi, Olumide
On the Study of Magnetohydrodynamic Squeezing Flow of Nanofluid between Two Parallel Plates Embedded in a Porous Medium [Volume 1, Issue 4, 2018, Pages 1-15]
-
Jimoh, Abdullahi Alao
Reliability-Based Investigation on Compressive Strength Characteristics of Structural-Sized Iroko (Meliceae Excelsa) and Mahogany (Khaya Ivorensis) Timber Column Found in Nigeria [Volume 1, Issue 1, 2018, Pages 23-37]
-
Jimoh, Abdullahi
EN 338 Strength Characterization and Grading of Igba (Rhizophora Racemosa) and Adere (Syzgium Guineense) Timbers for Structural Applications [Volume 2, Issue 4, 2019, Pages 24-37]
-
Joel, Manasseh
Simulation of Priority Queuing at TOTAL Petrol Filling Station in Makurdi Town Using SimEvents Toolkit [Volume 2, Issue 1, 2019, Pages 56-66]
-
Jonah, Jonah Okon
Characterization of Fluid-Structure Interaction on Hydrodynamic Performance of Different Ship Hulls Using ANSYS [Volume 7, Issue 1, 2024, Pages 13-34]
-
Ju, Bu Seog
Fragility of a Weir Structure due to Scouring [Volume 3, Issue 1, 2020, Pages 1-15]
-
Jung, WooYoung
Fragility of a Weir Structure due to Scouring [Volume 3, Issue 1, 2020, Pages 1-15]
K
-
Kabiri Koochaksaraei, Mohsen
Evaluation of Limit Equilibrium and Finite Element Methods in Slope Stability Analysis - Case Study of Zaremroud Landslide, Iran [Volume 2, Issue 3, 2019, Pages 1-15]
-
Kalani, Leila
Numerical Analysis of Reverse Dip-slip Fault Rupture on Steel Buildings [Volume 3, Issue 4, 2020, Pages 40-57]
-
Kalman Šipoš, Tanja
The Use of Machine Learning Models in Estimating the Compressive Strength of Recycled Brick Aggregate Concrete [Volume 4, Issue 4, 2021, Pages 1-25]
-
Kamgar, Reza
Improving the Behavior of Non-Uniform Tall Structures in Determining the Optimum Location of Belt Truss System [Volume 3, Issue 3, 2020, Pages 34-45]
-
Kamla, Youcef
Numerical Investigation of the Cooling of Shear Thinning Fluids in Cylindrical Horizontal Ducts [Volume 1, Issue 4, 2018, Pages 53-61]
-
Kamran, Hassan
Numerical Analysis of the Effect of Blast Wave on Pressure Vessels [Volume 6, Issue 3, 2023, Pages 39-51]
-
Kamran, Hassan
Optimizing the Design of Nickel and Composite Pressure Vessels [Volume 7, Issue 1, 2024, Pages 1-12]
-
Kapri, Priyam
Study of Traffic Forecast for Intelligent Transportation System [Volume 5, Issue 3, 2022, Pages 50-63]
-
Karamizadeh, Ehsan
An Innovative Forecasting Formula for Axial Compression Capacity of Circular Steel Tubes Filled with Concrete through Neural Networks [Volume 5, Issue 4, 2022, Pages 51-66]
-
Kashefizadeh, Mohammad Hossein
Steel Plate Shear Wall with Different Infill Steel Plates [Volume 1, Issue 3, 2018, Pages 1-14]
-
Kasiviswanathan, M
Mechanical Properties of Partial Replacement of Cement by adding Neem Gum/Accaacia Gum a Naturally Available Polymeric Fillers [Volume 6, Issue 3, 2023, Pages 73-85]
-
Kayode, Adegun Isaac
Numerical Modelling of Mixability of Highly Viscous Syrup in a U-Shaped Tank with Centrally Rotated Streamers [Volume 6, Issue 1, 2023, Pages 70-84]
-
Keerthi Gowda, B S K
Application of FOSM and Chebyshev’s Theorem Concept to Predict Compressive Strength Attributes of Corncob Ash Embedded Cement Concrete [Volume 3, Issue 1, 2020, Pages 16-24]
-
Keshavarz, Zahra
Determining the Drift in Reinforced Concrete Building Using ANFIS Soft Computing Modeling [Volume 1, Issue 1, 2018, Pages 1-11]
-
Khadem, Sharfaraj
Numerical Analysis of Slope Stability with Nailing Method Using Bamboo as Nailing Material [Volume 6, Issue 1, 2023, Pages 1-17]
-
Khademi, Atefehossadat
The Use of Machine Learning Models in Estimating the Compressive Strength of Recycled Brick Aggregate Concrete [Volume 4, Issue 4, 2021, Pages 1-25]
-
Khanmohammadi, Mohammad
Seismic Fragility Assessment of Local and Global Failures in Low-rise Non-ductile Existing RC Buildings: Empirical Shear-Axial Modelling vs. ASCE/SEI 41 Approach [Volume 1, Issue 1, 2018, Pages 38-57]
-
Kharmale, Swapnil B
Efficient Configuration of Storage Rack System as Per Nonlinear Static Pushover Analysis under Triangular and Uniform Pattern of Lateral Loading Pattern [Volume 1, Issue 2, 2018, Pages 41-58]
-
Khayat, Navid
Comparative Three-Dimensional Finite Element Analysis of Piled Raft Foundations [Volume 4, Issue 1, 2021, Pages 19-36]
-
Khiali, Vahid
Investigating on Hydrodynamic Behavior of Slotted Breakwater Walls Under Sea Waves [Volume 2, Issue 1, 2019, Pages 30-37]
-
Khosravi, Hossein
Evaluation of Seismic Behavior of Steel Shear Wall by Time History Analysis [Volume 2, Issue 1, 2019, Pages 38-55]
-
Kiran, K.K. H
Controlling Blast Loading of the Structural System by Cladding Material [Volume 1, Issue 3, 2018, Pages 79-99]
-
Kiran, K.K.
Blast Mitigations of Mid Rise Structures by Cladding Material [Volume 2, Issue 4, 2019, Pages 78-94]
-
Kiran, K.K.
Analytical Study of Fatigue Crack Growth Behavior of Steel Structure Reinforced with FRP [Volume 5, Issue 3, 2022, Pages 24-37]
-
Kiyani, Khosro
Time-Frequency Localization of Earthquake Record by Continuous Wavelet Transforms [Volume 2, Issue 2, 2019, Pages 49-61]
-
Kolo, Daniel N
Reliability Assessment of Natural Aggregate Pulverized Glass Powder Concrete Beam Subjected to Shearing Forces [Volume 6, Issue 2, 2023, Pages 45-53]
-
Kolo, Stephen Sunday
Reliability Assessment of Natural Aggregate Pulverized Glass Powder Concrete Beam Subjected to Shearing Forces [Volume 6, Issue 2, 2023, Pages 45-53]
-
Komasi, Mehdi
Numerical Analysis of the Effect of Blast Wave on Pressure Vessels [Volume 6, Issue 3, 2023, Pages 39-51]
-
Komasi, Mehdi
Optimizing the Design of Nickel and Composite Pressure Vessels [Volume 7, Issue 1, 2024, Pages 1-12]
-
Kori, Jagadish G
Controlling Blast Loading of the Structural System by Cladding Material [Volume 1, Issue 3, 2018, Pages 79-99]
-
Kori, Jagadish
Blast Mitigations of Mid Rise Structures by Cladding Material [Volume 2, Issue 4, 2019, Pages 78-94]
-
Kotnurkar, Asha S
Influence of Jeffrey Nanofluid on Peristaltic Motion in an Inclined Endoscope [Volume 4, Issue 2, 2021, Pages 68-94]
-
Kristiyanto, Kristiyanto
Blockchain-Building Information Modeling (BIM): Aplication in Cost Eficiency of Retrofitting Green Chemical Industrial Buildings [Volume 6, Issue 2, 2023, Pages 1-24]
-
Kudelya, Anatoliy Mikhail
Underground 3D Topography Measured by Radar Sounding [Volume 6, Issue 3, 2023, Pages 62-72]
-
Kulkarni, Sharawari Prafulla
Cylindrical Bending of Power Law Varied Functionally Graded Laminate Subjected to Thermo-Mechanical Loading [Volume 3, Issue 4, 2020, Pages 20-39]
-
Kulkarni, Sharawari Prafulla
3D Semi-Analytical Solutions for Functionally Grade Power Law Varied Laminate Subjected to Thermo-Mechanical Loading [Volume 4, Issue 3, 2021, Pages 70-98]
-
Kumar, Boppana Narendra
Development of Fly Ash-GGBS based Self Compacting Geo-Polymer Concrete with and without Steel Fibres [Volume 4, Issue 3, 2021, Pages 1-18]
-
Kumar, Boppana Narendra
Effect on the Addition of Nano Silica Particles and Peg on the Rheological, Strength and Durability Properties of High Strength Self Curing Self Compacting Concrete [Volume 5, Issue 2, 2022, Pages 91-112]
-
Kumar, G Vinod
Development of Fly Ash-GGBS based Self Compacting Geo-Polymer Concrete with and without Steel Fibres [Volume 4, Issue 3, 2021, Pages 1-18]
-
Kumar, Pariyada Pradeep
Effect on the Addition of Nano Silica Particles and Peg on the Rheological, Strength and Durability Properties of High Strength Self Curing Self Compacting Concrete [Volume 5, Issue 2, 2022, Pages 91-112]
-
Kumbhar, Yogesh D
An ANN to Predict Sorptivity and Water Absorption of Concrete Made with Industrial Waste and Artificial Sand [Volume 6, Issue 1, 2023, Pages 44-56]
-
Kvocak, Vincent
Prefabricated Composite Beams Based on Innovative Shear Connection [Volume 4, Issue 2, 2021, Pages 20-26]
L
-
Laribi, Rim
3D Modeling and Augmented Reality for Learning [Volume 6, Issue 3, 2023, Pages 52-61]
-
Li, FaYong
Effect of Threshold Twin Volume Fraction in Crystal Plasticity Modeling [Volume 4, Issue 1, 2021, Pages 84-100]
-
Liu, Qing
Effect of Threshold Twin Volume Fraction in Crystal Plasticity Modeling [Volume 4, Issue 1, 2021, Pages 84-100]
-
Lonetti, Paolo
A Moving Cohesive Mesh Formulation to Predict Debonding Phenomena in Layered Structures [Volume 1, Issue 2, 2018, Pages 16-26]
M
-
Mahdavi, Masoud
Modelling and Comparison of Plastic Performance in Ten Types of New Steel Braces under Pushover Analysis [Volume 6, Issue 2, 2023, Pages 79-97]
-
Mahdavi, Masoud
Evaluation and Comparison of Seismic Performance in Irregular Steel Structures with Modern Concentrically Braces [Volume 6, Issue 4, 2023, Pages 59-79]
-
Mahdi, Mofid
Numerical Simulation of Concrete Mix Structure and Detection of its Elastic Stiffness [Volume 1, Issue 1, 2018, Pages 12-22]
-
Mahdi, Mofid
Three-Dimensional Modelling of Concrete Mix Structure for Numerical Stiffness Determination [Volume 1, Issue 3, 2018, Pages 15-27]
-
Makarios, Triantafyllos
New Seismic Pushover Procedures using either Floor Enforced-Displacements or Inelastic Dynamic Eccentricities on Irregular Single-Storey R/C Buildings [Volume 2, Issue 4, 2019, Pages 1-23]
-
Malloth, Abhilash
Modal Analysis of a Thin-Walled Box-Girder Bridge and Railway Track Using Finite Element Framework [Volume 4, Issue 4, 2021, Pages 64-83]
-
Mamun, Md. Abdullah Al
Study on Natural Frequency of Frame Structures [Volume 2, Issue 2, 2019, Pages 36-48]
-
Mane, Kiran M
An ANN to Predict Sorptivity and Water Absorption of Concrete Made with Industrial Waste and Artificial Sand [Volume 6, Issue 1, 2023, Pages 44-56]
-
Marie, Iqbal
Numerical Simulation of Concrete Mix Structure and Detection of its Elastic Stiffness [Volume 1, Issue 1, 2018, Pages 12-22]
-
Marie, Iqbal
Three-Dimensional Modelling of Concrete Mix Structure for Numerical Stiffness Determination [Volume 1, Issue 3, 2018, Pages 15-27]
-
Marinho, Josenilson A.
Analytical Simulations for Spill Point Source Localization Using Inverse Problems in Closed Form [Volume 6, Issue 1, 2023, Pages 36-43]
-
Martins, Jairo Aparecido
Numerical Simulation of Stresses Produced on Hydraulic Clutch Discs due to Heat Generated During Operation [Volume 4, Issue 3, 2021, Pages 19-28]
-
Mathi, K. Kavin
Static Analysis of Rigid Airfield Pavement Using Finite Element Method Vs Closed-Form Solution [Volume 5, Issue 4, 2022, Pages 23-50]
-
Mathi, K. Kavin
Dynamic and Fatigue Life Prediction Analysis of Airfield Runway Rigid Pavement Using Finite Element Method [Volume 5, Issue 3, 2022, Pages 1-23]
-
Maydanchi, Mohammad
Data Visualization of Traffic Violations in Maryland, U.S. [Volume 6, Issue 1, 2023, Pages 57-69]
-
Mbadike, Elvis
Modelling of the Compressive Strength of Palm-Nut-Fibre Concrete Using Scheffe’s Theory [Volume 3, Issue 1, 2020, Pages 36-52]
-
Mbadike, Elvis
Characterisation and Use of Cassava Peel Ash in Concrete Production [Volume 3, Issue 2, 2020, Pages 12-28]
-
Meena, Rahul Kumar
Study of Traffic Forecast for Intelligent Transportation System [Volume 5, Issue 3, 2022, Pages 50-63]
-
Megalla, Khairy F.
Cost Analysis of a Large Solar Plant with Parabolic Trough Concentrators Using Molten Salt Storage Tank [Volume 4, Issue 1, 2021, Pages 37-55]
-
Mehrdoost, Zahra
Numerical Investigation of Car Park Fire at Special Weather Conditions [Volume 6, Issue 4, 2023, Pages 33-45]
-
Mesbah, Habib-Abdelhak
Contribution of the Blast Furnace Slag on the Behavior of HPC in a Hydrochloric Environment [Volume 4, Issue 2, 2021, Pages 27-38]
-
Miličević, Ivana
The Use of Machine Learning Models in Estimating the Compressive Strength of Recycled Brick Aggregate Concrete [Volume 4, Issue 4, 2021, Pages 1-25]
-
Mironov, A.S.
Approaches in the development of motion sensors in the dynamics of granular media [Volume 2, Issue 2, 2019, Pages 1-14]
-
Mirrashid, Masoomeh
A Computational Model for Estimating the Compressive Strength of Mortars Admixed with Mineral Materials [Volume 1, Issue 4, 2018, Pages 16-24]
-
Moghiman, Mohammad
Numerical Investigation of Car Park Fire at Special Weather Conditions [Volume 6, Issue 4, 2023, Pages 33-45]
-
Mohamed, Mohamed H.
Cost Analysis of a Large Solar Plant with Parabolic Trough Concentrators Using Molten Salt Storage Tank [Volume 4, Issue 1, 2021, Pages 37-55]
-
Mohasel, Mohamadhosein
Presenting an Optimal Design Procedure for a Variety of TLCDs to Improve the Seismic Response of Offshore Platforms [Volume 6, Issue 3, 2023, Pages 1-26]
-
Mohitkar, Vinod M
Efficient Configuration of Storage Rack System as Per Nonlinear Static Pushover Analysis under Triangular and Uniform Pattern of Lateral Loading Pattern [Volume 1, Issue 2, 2018, Pages 41-58]
-
Molla, Md Mamun
Lattice Boltzmann Simulation of Fluid Flow and Heat Transfer through Partially Filled Porous Media [Volume 2, Issue 4, 2019, Pages 38-57]
-
Mominul Alam, Shaikh Md
Identifying the Amount of Heat Flux and Thermal Conduction through Fabrics with Appropriate Heat Equation [Volume 4, Issue 2, 2021, Pages 53-67]
-
Moniri, Alireza
Use of Tuned Mass Dampers in Controlling the Vibrations of Steel Structures with Vertical Irregularity of Mass [Volume 1, Issue 2, 2018, Pages 83-94]
-
Moradi, Mostafa
Multi-objective Optimization of Steel Frames with Added Viscous Dampers using Imperialist Competitive Algorithm [Volume 5, Issue 1, 2022, Pages 69-88]
-
Morsali, Saeed
Determination of Environmental Impacts of Bituminous Highway’s by Life Cycle Assessment [Volume 3, Issue 2, 2020, Pages 38-50]
-
Moshaver, Paria
Adaptive Neuro-Fuzzy Inference System (ANFIS) Integrated with Genetic Algorithm to Optimize Piezoelectric Cantilever-Oscillator-Spring Energy Harvester: Verification with Closed-Form Solution [Volume 5, Issue 4, 2022, Pages 1-22]
-
Mostafa Gharabaghi, Ahmad Reza
Presenting an Optimal Design Procedure for a Variety of TLCDs to Improve the Seismic Response of Offshore Platforms [Volume 6, Issue 3, 2023, Pages 1-26]
-
Motamed, Sara
Facial Emotion Recognition Using Convolutional Brain Emotional Learning (CBEL) Model [Volume 5, Issue 3, 2022, Pages 38-49]
-
Mota Silva, Jean Carlos
Human Comfort Assessment of Buildings Considering the Effect of the Masonry Infills and the Soil-Structure Interaction [Volume 2, Issue 3, 2019, Pages 38-52]
-
Muhammed, Kabeer Olalekan
Numerical Modelling of Mixability of Highly Viscous Syrup in a U-Shaped Tank with Centrally Rotated Streamers [Volume 6, Issue 1, 2023, Pages 70-84]
N
-
Naderpour, Hosein
A Computational Model for Estimating the Compressive Strength of Mortars Admixed with Mineral Materials [Volume 1, Issue 4, 2018, Pages 16-24]
-
Nadgouda, Pavan A
An ANN to Predict Sorptivity and Water Absorption of Concrete Made with Industrial Waste and Artificial Sand [Volume 6, Issue 1, 2023, Pages 44-56]
-
Nallasivam, K
Dynamic and Fatigue Life Prediction Analysis of Airfield Runway Rigid Pavement Using Finite Element Method [Volume 5, Issue 3, 2022, Pages 1-23]
-
Nallasivam, K
Static Analysis of Rigid Airfield Pavement Using Finite Element Method Vs Closed-Form Solution [Volume 5, Issue 4, 2022, Pages 23-50]
-
Nallasivam, K
Static Analysis of Rigid Pavement Runway under the Influence of Aircraft Loading by Finite Element Technique [Volume 5, Issue 4, 2022, Pages 79-101]
-
Nallasivam, K
Analysis of Rigid Pavement Subjected to Aircraft Load Using Finite Element Technique [Volume 6, Issue 2, 2023, Pages 54-78]
-
Nallasivam, K.
Modal Analysis of a Thin-Walled Box-Girder Bridge and Railway Track Using Finite Element Framework [Volume 4, Issue 4, 2021, Pages 64-83]
-
Narendra Kumar, Boppana
Assessment of Crack Development Age Due to Corrosion on Reinforced High Strength Self Compacting Concrete with Inclusion of Potential Ternary Blended Cementitious Materials [Volume 6, Issue 1, 2023, Pages 18-35]
-
Ndububa, Emmanuel E
Chemical Composition of Commonly Used Local and Foreign Steel Reinforcements and the Effects on the Strength Property of the Material Composites [Volume 2, Issue 3, 2019, Pages 27-37]
-
Nemati, Mahmood
Development of Dam-Break Model Considering Real Case Studies with Asymmetric Reservoirs [Volume 4, Issue 4, 2021, Pages 39-63]
-
Noman, Ahmad
Numerical Simulation and Parametric Study on the Moment Capacity of Composite Beam [Volume 2, Issue 3, 2019, Pages 16-26]
-
Norouzi Azad, Alireza
Data Visualization of Traffic Violations in Maryland, U.S. [Volume 6, Issue 1, 2023, Pages 57-69]
-
Nwafor, Emmanuel Okechukwu
Stabilization of Ikpayongu laterite using Cement, RHA and Carbide Waste Mixture for Road Subbase and Base Material [Volume 3, Issue 4, 2020, Pages 77-96]
-
Nwafor, Emmanuel Okechukwu
Economic Importance of Solid Waste in the Production of Pyrolytic Oil Utilized in Polymer Modified Bio-Binder Production in Makurdi Nigeria [Volume 6, Issue 4, 2023, Pages 21-32]
O
-
Odeyemi, Samson Olalekan
Modelling and Simulation of Reinforced Concrete Bridges with varying percentages of Shape Memory Alloy Rods [Volume 1, Issue 4, 2018, Pages 62-70]
-
Ogar, Joseph O.
Characteristic Properties of Concrete with Recycled Burnt Bricks as Coarse Aggregates Replacement [Volume 4, Issue 1, 2021, Pages 56-72]
-
Ogbonna, Chimmaobi
Characterisation and Use of Cassava Peel Ash in Concrete Production [Volume 3, Issue 2, 2020, Pages 12-28]
-
Ogolo, Naomi Amoni
Effect of Aluminum Oxide Powder and Nanoparticles on Kaolinite Mobilization in Sand [Volume 5, Issue 4, 2022, Pages 67-78]
-
Ogolo, Naomi Amoni
Viscosity Model of Polymer Extract from Irvingia Gabonensis [Volume 6, Issue 3, 2023, Pages 27-38]
-
Ohwofadjeke, Paul Ogheneochuko
Characterization of Fluid-Structure Interaction on Hydrodynamic Performance of Different Ship Hulls Using ANSYS [Volume 7, Issue 1, 2024, Pages 13-34]
-
Ojo, Olatunji Oladimeji
Design, Fabrication and Structural Analysis of a 5 Tons Hydraulic Press and Mould Machine for Crucible Production [Volume 3, Issue 3, 2020, Pages 46-58]
-
Ojobo, Sylvester O
Stabilization of Ikpayongu laterite using Cement, RHA and Carbide Waste Mixture for Road Subbase and Base Material [Volume 3, Issue 4, 2020, Pages 77-96]
-
Okoroafor, Ijere
Viscosity Model of Polymer Extract from Irvingia Gabonensis [Volume 6, Issue 3, 2023, Pages 27-38]
-
Olaleke, Olujoba Mesach
Design, Fabrication and Structural Analysis of a 5 Tons Hydraulic Press and Mould Machine for Crucible Production [Volume 3, Issue 3, 2020, Pages 46-58]
-
Olarewaju, Kolade Oluwole
Chemical Composition of Commonly Used Local and Foreign Steel Reinforcements and the Effects on the Strength Property of the Material Composites [Volume 2, Issue 3, 2019, Pages 27-37]
-
Olayiwola, Patrick Shola
Numerical Investigation into the Effect of Laminated Casing on the Impact Resistance of Smartphone Screens [Volume 2, Issue 4, 2019, Pages 58-77]
-
Onyekonwu, Mike O.
Effect of Aluminum Oxide Powder and Nanoparticles on Kaolinite Mobilization in Sand [Volume 5, Issue 4, 2022, Pages 67-78]
-
Onyekonwu, Mike O.
Viscosity Model of Polymer Extract from Irvingia Gabonensis [Volume 6, Issue 3, 2023, Pages 27-38]
-
Oyar Hossein, Mohamadamin
Investigating on Hydrodynamic Behavior of Slotted Breakwater Walls Under Sea Waves [Volume 2, Issue 1, 2019, Pages 30-37]
P
-
Palash, A.B.M. Golam Rabbany
Study of the Effect of Vibration Characteristics on the Stability of RC Structures [Volume 5, Issue 2, 2022, Pages 113-129]
-
Parker, Johné
Adaptive Neuro-Fuzzy Inference System (ANFIS) Integrated with Genetic Algorithm to Optimize Piezoelectric Cantilever-Oscillator-Spring Energy Harvester: Verification with Closed-Form Solution [Volume 5, Issue 4, 2022, Pages 1-22]
-
Pascuzzo, Arturo
A Moving Cohesive Mesh Formulation to Predict Debonding Phenomena in Layered Structures [Volume 1, Issue 2, 2018, Pages 16-26]
-
Paswan, Abhishek Prakash
Study of Traffic Forecast for Intelligent Transportation System [Volume 5, Issue 3, 2022, Pages 50-63]
-
Patil, Amrutrao E
Seismic Analysis of Eccentric Steel Structure on a Shaking Table [Volume 3, Issue 2, 2020, Pages 1-11]
-
Pendhari, Sandeep Shivram
Cylindrical Bending of Power Law Varied Functionally Graded Laminate Subjected to Thermo-Mechanical Loading [Volume 3, Issue 4, 2020, Pages 20-39]
-
Pendhari, Sandeep Shivram
3D Semi-Analytical Solutions for Functionally Grade Power Law Varied Laminate Subjected to Thermo-Mechanical Loading [Volume 4, Issue 3, 2021, Pages 70-98]
-
Pendhari, Sandeep Shivram
Performance-Based Design of RC Structures Subjected to Seismic Load Using a Hybrid Retrofitting Method with Friction Damper and Steel Bracing [Volume 5, Issue 1, 2022, Pages 19-35]
-
Pendhari, Sandeep Shivram
Response Control of Structures Subjected to Multi-Hazards of Earthquake and Wind Using Base Isolators and Absorbers [Volume 5, Issue 2, 2022, Pages 19-44]
-
Pinem, Mekro Permana
Blockchain-Building Information Modeling (BIM): Aplication in Cost Eficiency of Retrofitting Green Chemical Industrial Buildings [Volume 6, Issue 2, 2023, Pages 1-24]
-
Pirmohammadi Alishah, Farhad
The Effect of Zeolite on Different Mechanical Properties and Permeability of Self-Compacting Concrete [Volume 3, Issue 1, 2020, Pages 53-68]
-
Podousova, Tatyana
Underground 3D Topography Measured by Radar Sounding [Volume 6, Issue 3, 2023, Pages 62-72]
-
Pouya, Shaheen
Data Visualization of Traffic Violations in Maryland, U.S. [Volume 6, Issue 1, 2023, Pages 57-69]
-
Prajwal, R.P.N.
Analytical Study of Fatigue Crack Growth Behavior of Steel Structure Reinforced with FRP [Volume 5, Issue 3, 2022, Pages 24-37]
-
Prasad, CSMV
Analytical Study of Fatigue Crack Growth Behavior of Steel Structure Reinforced with FRP [Volume 5, Issue 3, 2022, Pages 24-37]
Q
-
Quadri, S.S.
Experimental and Numerical Investigations of Laterally Loaded Pile Group in Multilayered Cohesionless soil [Volume 1, Issue 3, 2018, Pages 28-45]
R
-
Rababah, Mumen
Data Visualization of Traffic Violations in Maryland, U.S. [Volume 6, Issue 1, 2023, Pages 57-69]
-
Raeisi, Jalil
Time-Frequency Localization of Earthquake Record by Continuous Wavelet Transforms [Volume 2, Issue 2, 2019, Pages 49-61]
-
Rahgozar, Reza
Improving the Behavior of Non-Uniform Tall Structures in Determining the Optimum Location of Belt Truss System [Volume 3, Issue 3, 2020, Pages 34-45]
-
Rahman, Faysal Ibna
A Circumstantial Review on Ride-sharing Profile in Dhaka City [Volume 3, Issue 4, 2020, Pages 58-76]
-
Rahman, Ishtier
Numerical Analysis of Flow and Heat Transfer Characteristics between Two Parallel Plates with Constriction(s) [Volume 4, Issue 3, 2021, Pages 55-69]
-
Rahman, Sazedur
Numerical Analysis of Flow and Heat Transfer Characteristics between Two Parallel Plates with Constriction(s) [Volume 4, Issue 3, 2021, Pages 55-69]
-
Rahman, S M Shazeebur
Application of Numerical Method in Assessing the Variations in Pile Group Efficiency under Different Circumstances [Volume 5, Issue 1, 2022, Pages 50-68]
-
Rahmon, Rauf
Reliability-Based Investigation on Compressive Strength Characteristics of Structural-Sized Iroko (Meliceae Excelsa) and Mahogany (Khaya Ivorensis) Timber Column Found in Nigeria [Volume 1, Issue 1, 2018, Pages 23-37]
-
Raj, Ritu
Study of Traffic Forecast for Intelligent Transportation System [Volume 5, Issue 3, 2022, Pages 50-63]
-
Rajesh, Vemula
Development of Fly Ash-GGBS based Self Compacting Geo-Polymer Concrete with and without Steel Fibres [Volume 4, Issue 3, 2021, Pages 1-18]
-
Rashid, Muhaimeen Ur
Numerical Analysis of Slope Stability with Nailing Method Using Bamboo as Nailing Material [Volume 6, Issue 1, 2023, Pages 1-17]
-
Reddy, Gami
Performance-Based Design of RC Structures Subjected to Seismic Load Using a Hybrid Retrofitting Method with Friction Damper and Steel Bracing [Volume 5, Issue 1, 2022, Pages 19-35]
-
Reddy, Gami
Response Control of Structures Subjected to Multi-Hazards of Earthquake and Wind Using Base Isolators and Absorbers [Volume 5, Issue 2, 2022, Pages 19-44]
-
Rezuan, Mehebub
Numerical Assessment of Isolated Footing Capacity due to its Size and the Impact of Neighboring Foundation [Volume 5, Issue 2, 2022, Pages 45-70]
-
Ribeiro, Vinicius G.
Analytical Simulations for Spill Point Source Localization Using Inverse Problems in Closed Form [Volume 6, Issue 1, 2023, Pages 36-43]
-
Risan, Hussam K.
Systematic Review for Behavior of Post-Tensioned Concrete Members with Different Tendon Bonding Conditions [Volume 5, Issue 1, 2022, Pages 36-49]
-
Romão, Estaner Claro
Numerical Study of Hydraulic Percolation in Porous Media Using Two Hydraulic Structures [Volume 6, Issue 4, 2023, Pages 1-20]
-
Romão, Estaner Claro
Numerical Simulation of Stresses Produced on Hydraulic Clutch Discs due to Heat Generated During Operation [Volume 4, Issue 3, 2021, Pages 19-28]
-
Romero, Fe
Assessing Flood Occurrence and Modeling Impact of Urban Drainage Structure [Volume 3, Issue 3, 2020, Pages 1-11]
-
Romero, Nelson
Assessing Flood Occurrence and Modeling Impact of Urban Drainage Structure [Volume 3, Issue 3, 2020, Pages 1-11]
-
Romero, Raymundo
Assessing Flood Occurrence and Modeling Impact of Urban Drainage Structure [Volume 3, Issue 3, 2020, Pages 1-11]
-
Roshani, Abdolreza
Detecting Human Behavioral Pattern in Rock, Paper, Scissors Game Using Artificial Intelligence [Volume 3, Issue 1, 2020, Pages 25-35]
-
Roshani, Gholam Hossein
Detecting Human Behavioral Pattern in Rock, Paper, Scissors Game Using Artificial Intelligence [Volume 3, Issue 1, 2020, Pages 25-35]
-
Roy, Amrit Kumar
Wind Pressure Coefficients on Pyramidal Roof of Square Plan Low Rise Double Storey Building [Volume 2, Issue 1, 2019, Pages 1-16]
-
Roy, Amrit Kumar
Wind Induced Pressure Variation on High-Rise Geometrically Modified Building Having Interference through CFD Simulation [Volume 4, Issue 4, 2021, Pages 26-38]
-
Roy, Sandip
Numerical Analysis of Slope Stability with Nailing Method Using Bamboo as Nailing Material [Volume 6, Issue 1, 2023, Pages 1-17]
-
Rugbani, Ali
Aerodynamic Analysis of Autonomous Battery Electric Truck Concepts for Drag Reduction [Volume 5, Issue 2, 2022, Pages 71-90]
-
Rushikesh, Mirkute
Assessment of Crack Development Age Due to Corrosion on Reinforced High Strength Self Compacting Concrete with Inclusion of Potential Ternary Blended Cementitious Materials [Volume 6, Issue 1, 2023, Pages 18-35]
S
-
Saba, Hamidreza
Comparative Study of a Subgrade Coefficient Reaction on an Arched Dam Using the Winkler Foundation Model [Volume 3, Issue 2, 2020, Pages 29-37]
-
Saba, Hamidreza
Evaluation of the Effect of Modulus of Elasticity in Clay Core on the Arching in the Crest of Earth Dams [Volume 3, Issue 3, 2020, Pages 12-20]
-
Saha, Ovi Ranjan
Flood Hazard Mapping of the Floodplain of the Jamuna River [Volume 5, Issue 1, 2022, Pages 89-101]
-
Sahel, Djamel
Numerical Investigation of the Cooling of Shear Thinning Fluids in Cylindrical Horizontal Ducts [Volume 1, Issue 4, 2018, Pages 53-61]
-
Salajeghe, Ali
Improving the Behavior of Non-Uniform Tall Structures in Determining the Optimum Location of Belt Truss System [Volume 3, Issue 3, 2020, Pages 34-45]
-
Salakin, Sirajus
Experimental Study of Concrete Using Raw Rice Husk as Partial Replacement of Cement with Natural Fiber (Jute Fiber) as Reinforcing Material [Volume 4, Issue 3, 2021, Pages 29-42]
-
Salama, Magdy I.
Buckling of Tapered Columns with Polygon Cross-Section [Volume 1, Issue 2, 2018, Pages 59-69]
-
Salama, Magdy I
Elastic Buckling of Single-Stepped Columns with End and Intermediate Axial Loads [Volume 1, Issue 4, 2018, Pages 25-35]
-
Salehi Fereidouni, Saleh
Investigation on the Seismic Performance of Joints with Different Shapes in Bridge Columns [Volume 5, Issue 1, 2022, Pages 1-18]
-
Salehi Fereidouni, Saleh
Evaluation the Impact of Flexible Joints and Deck on the Seismic Response of Bridges [Volume 5, Issue 2, 2022, Pages 1-18]
-
Salokhe, Sudarshan A
An ANN to Predict Sorptivity and Water Absorption of Concrete Made with Industrial Waste and Artificial Sand [Volume 6, Issue 1, 2023, Pages 44-56]
-
Sangle, Keshav K
Efficient Configuration of Storage Rack System as Per Nonlinear Static Pushover Analysis under Triangular and Uniform Pattern of Lateral Loading Pattern [Volume 1, Issue 2, 2018, Pages 41-58]
-
Santos da Silva, Jose Guilherme
Human Comfort Assessment of Buildings Considering the Effect of the Masonry Infills and the Soil-Structure Interaction [Volume 2, Issue 3, 2019, Pages 38-52]
-
Sardalia, Atul
Wind Induced Pressure Variation on High-Rise Geometrically Modified Building Having Interference through CFD Simulation [Volume 4, Issue 4, 2021, Pages 26-38]
-
Sarsam, Saad Issa
Influence of Additives on the Failure Mode of Asphalt Concrete [Volume 6, Issue 4, 2023, Pages 80-91]
-
Shabani, Mohammad Javad
Numerical Analysis of Reverse Dip-slip Fault Rupture on Steel Buildings [Volume 3, Issue 4, 2020, Pages 40-57]
-
Shahriar, Fahim
Application of Numerical Method in Assessing the Variations in Pile Group Efficiency under Different Circumstances [Volume 5, Issue 1, 2022, Pages 50-68]
-
Shahriar, Mohammad Ahnaf
Numerical Analysis of Flow and Heat Transfer Characteristics between Two Parallel Plates with Constriction(s) [Volume 4, Issue 3, 2021, Pages 55-69]
-
Shahrokhinasab, Esmail
Improvement of Concrete Characterization Using Nanosilica [Volume 4, Issue 2, 2021, Pages 39-52]
-
Shakeri, Mohammad Sadegh
The Relation between Deposited Weight and Quality of Coating in EPD Method Derived by Genetic Programming [Volume 4, Issue 1, 2021, Pages 73-83]
-
Sharifi, Yaser
An Innovative Forecasting Formula for Axial Compression Capacity of Circular Steel Tubes Filled with Concrete through Neural Networks [Volume 5, Issue 4, 2022, Pages 51-66]
-
Siddika, Ayesha
Study on Natural Frequency of Frame Structures [Volume 2, Issue 2, 2019, Pages 36-48]
-
Silveira, André M.
Analytical Simulations for Spill Point Source Localization Using Inverse Problems in Closed Form [Volume 6, Issue 1, 2023, Pages 36-43]
-
Silveira, Sidnei R.
Analytical Simulations for Spill Point Source Localization Using Inverse Problems in Closed Form [Volume 6, Issue 1, 2023, Pages 36-43]
-
Sinaga, Lastarida
Blockchain-Building Information Modeling (BIM): Aplication in Cost Eficiency of Retrofitting Green Chemical Industrial Buildings [Volume 6, Issue 2, 2023, Pages 1-24]
-
Singh, Indrajeet
Study of Traffic Forecast for Intelligent Transportation System [Volume 5, Issue 3, 2022, Pages 50-63]
-
Singh, Jagbir
Wind Pressure Coefficients on Pyramidal Roof of Square Plan Low Rise Double Storey Building [Volume 2, Issue 1, 2019, Pages 1-16]
-
Singh, Jagbir
Wind Induced Pressure Variation on High-Rise Geometrically Modified Building Having Interference through CFD Simulation [Volume 4, Issue 4, 2021, Pages 26-38]
-
Siqueira, Adriano Francisco
Numerical Study of Hydraulic Percolation in Porous Media Using Two Hydraulic Structures [Volume 6, Issue 4, 2023, Pages 1-20]
-
Sobamowo, Gbeminiyi Musibau
Transient Combustion Analysis for Iron Micro-Particles in a Gaseous Oxidizing Medium Using Adomian Decomposition Method [Volume 1, Issue 2, 2018, Pages 1-15]
-
Sobamowo, Gbeminiyi Musibau
On the Study of Magnetohydrodynamic Squeezing Flow of Nanofluid between Two Parallel Plates Embedded in a Porous Medium [Volume 1, Issue 4, 2018, Pages 1-15]
-
Sohag, Md. Ariful Islam
Experimental Study of Concrete Using Raw Rice Husk as Partial Replacement of Cement with Natural Fiber (Jute Fiber) as Reinforcing Material [Volume 4, Issue 3, 2021, Pages 29-42]
-
Staudt, Ederson
Analytical Simulations for Spill Point Source Localization Using Inverse Problems in Closed Form [Volume 6, Issue 1, 2023, Pages 36-43]
T
-
Taiwo, Audu Mohammed
Comparative Studies of the Effects of Blocking and Water Repellant Agents on Tensile Strengths of Fanpalm [Volume 2, Issue 1, 2019, Pages 17-29]
-
Taiwo, Audu Mohammed
Chemical Composition of Commonly Used Local and Foreign Steel Reinforcements and the Effects on the Strength Property of the Material Composites [Volume 2, Issue 3, 2019, Pages 27-37]
-
Talawar, Vijaylaxmi T.
Influence of Jeffrey Nanofluid on Peristaltic Motion in an Inclined Endoscope [Volume 4, Issue 2, 2021, Pages 68-94]
-
Thombare, Chandrakant Narhari
Efficient Configuration of Storage Rack System as Per Nonlinear Static Pushover Analysis under Triangular and Uniform Pattern of Lateral Loading Pattern [Volume 1, Issue 2, 2018, Pages 41-58]
-
Torkian, Hojjatollah
Determining the Drift in Reinforced Concrete Building Using ANFIS Soft Computing Modeling [Volume 1, Issue 1, 2018, Pages 1-11]
-
Tschuchnigg, Franz
Numerical Analysis of Segmental Tunnel Linings employing a Hybrid Modeling Approach [Volume 4, Issue 1, 2021, Pages 1-18]
-
Tusher, Hasib Imran
A Circumstantial Review on Ride-sharing Profile in Dhaka City [Volume 3, Issue 4, 2020, Pages 58-76]
U
-
Udo, Anietie Effiong
Characterization of Fluid-Structure Interaction on Hydrodynamic Performance of Different Ship Hulls Using ANSYS [Volume 7, Issue 1, 2024, Pages 13-34]
-
Ugbede, Moses George
The Effect of Heavy Metal Concentration on the Soil of Odagbo Area, Kogi State Nigeria [Volume 4, Issue 4, 2021, Pages 84-93]
-
Ukwu, Austin
Viscosity Model of Polymer Extract from Irvingia Gabonensis [Volume 6, Issue 3, 2023, Pages 27-38]
V
-
Vahedi, Masood
Improvement of Concrete Characterization Using Nanosilica [Volume 4, Issue 2, 2021, Pages 39-52]
-
Vanova, Patricia
Prefabricated Composite Beams Based on Innovative Shear Connection [Volume 4, Issue 2, 2021, Pages 20-26]
-
Vashpanov, Yuriy Alex
Underground 3D Topography Measured by Radar Sounding [Volume 6, Issue 3, 2023, Pages 62-72]
-
Venâncio, Stênio de Sousa
Numerical Study of Hydraulic Percolation in Porous Media Using Two Hydraulic Structures [Volume 6, Issue 4, 2023, Pages 1-20]
-
Verma, Virajan
Modal Analysis of a Thin-Walled Box-Girder Bridge and Railway Track Using Finite Element Framework [Volume 4, Issue 4, 2021, Pages 64-83]
-
Vhanmane, Mangesh
Analysis of Diagrid Structural System for High Rise Steel Buildings [Volume 3, Issue 3, 2020, Pages 21-33]
W
-
Waheed, Akindoye
On the Study of Magnetohydrodynamic Squeezing Flow of Nanofluid between Two Parallel Plates Embedded in a Porous Medium [Volume 1, Issue 4, 2018, Pages 1-15]
-
Wang, L.
Modeling of the New Boundary of Reaction Force Based on Particle Collision in the Smoothed Particle Hydrodynamics [Volume 1, Issue 3, 2018, Pages 46-66]
-
Wang, P.
Modeling of the New Boundary of Reaction Force Based on Particle Collision in the Smoothed Particle Hydrodynamics [Volume 1, Issue 3, 2018, Pages 46-66]
-
Wani, Khair Ul Faisal
Static Analysis of Rigid Pavement Runway under the Influence of Aircraft Loading by Finite Element Technique [Volume 5, Issue 4, 2022, Pages 79-101]
-
Wani, Khair Ul Faisal
Analysis of Rigid Pavement Subjected to Aircraft Load Using Finite Element Technique [Volume 6, Issue 2, 2023, Pages 54-78]
Y
-
Yasar, Rafjany
Numerical Analysis of Retrofitted RC Column under Lateral Load [Volume 5, Issue 3, 2022, Pages 82-95]
-
Ye, Yunchao
Vehicle Bridge Interaction Analysis on Concrete and Steel Curved Bridges [Volume 4, Issue 4, 2021, Pages 94-108]
-
Yinusa, Ahmed
Transient Combustion Analysis for Iron Micro-Particles in a Gaseous Oxidizing Medium Using Adomian Decomposition Method [Volume 1, Issue 2, 2018, Pages 1-15]
-
Yücel Işildar, Gamze
Determination of Environmental Impacts of Bituminous Highway’s by Life Cycle Assessment [Volume 3, Issue 2, 2020, Pages 38-50]
Z
-
Zabadal, Jorge G.
Analytical Simulations for Spill Point Source Localization Using Inverse Problems in Closed Form [Volume 6, Issue 1, 2023, Pages 36-43]
-
Zakariah, D. S.
Design and Evaluation of Drip Irrigation System for Date Palm Plantations in MAUTECH, Yola, Adamawa State, Northeastern Nigeria [Volume 1, Issue 2, 2018, Pages 70-82]
-
Zaki, Rana Ismail K.
Systematic Review for Behavior of Post-Tensioned Concrete Members with Different Tendon Bonding Conditions [Volume 5, Issue 1, 2022, Pages 36-49]
-
Zolfagharysaravi, Sina
Improvement of Concrete Characterization Using Nanosilica [Volume 4, Issue 2, 2021, Pages 39-52]
Your query does not match with any item